|
Source : Media Section |
اخبار القسم en
Discussion of a doctoral thesis in production engineering
|
|||||||||||
|
Discussion of a doctoral thesis in production engineering
|
|||||||||||
|
Production Engineering Branch (Hala Ali Habib) was discussed for her thesis titled:- “Investigation of formability and fracture prediction in incremental sheet forming for ductile materials”
With the specialty of production engineering, in the hall of the late Professor Dr. Ibrahim Mahmoud Mansour in the department on Thursday, 11/9/2023, the discussion committee consisted of those whose names are listed below: - Mr. Dr. Wissam Kazem Hamdan University of Technology / Department of Biomedicine (Chairman) Mr. Dr. Bassem Ajeel Abbas, University of Babylon/Department of Mechanical Engineering (Member) Mother. Dr.. Adnan Ibrahim Muhammad / Presidency of the Republic (Member) Prof. Dr. Aqeel Sabry, Badan University of Technology / Department of Production and Minerals Engineering (Member) Prof. Muhannad Muhammad Hussein, University of Technology / Department of Production and Minerals Engineering (Member) Prof. Dr. Ali Abbar Khalif, University of Technology / Department of Production and Mineral Engineering (Supervisor) Prof. Dr. Mohsen Jabr Juwaij / Al-Farahidi University / Department of Mechanical Engineering (supervisor) The student received a rating of (very good, high).
|
|||||||||||
Discussion of a master’s thesis in production engineering
|
||||||||
|
Discussion of a master’s thesis in production engineering
|
||||||||
|
The master’s student in the Production Engineering and Metallurgy Department /Production Engineering Branch (Dina Ali Abdel Razzaq) was discussed for her thesis tagged with:- Investigation of process parameters of fused deposition modeling (FDM)
With the specialty of production engineering, in the hall of the late Professor Dr. Ibrahim Mahmoud Mansour in the department on Tuesday 11/7/2023, the discussion committee consisted of those whose names are listed below: - Dr. Tahseen Fadel Abbas, University of Technology/ the Production Engineering and Metallurgy Department (Chairman) .Dr. Wagdi Sadiq Abboud, Al-Nahrain University / College of Engineering (Member) Dr. Mohamed Medhat Hassan, University of Technology/ the Production Engineering and Metallurgy Department (Member) Dr. Abdullah Faraj Hoyer, University of Technology / the Production Engineering and Metallurgy Department (member and supervisor) Dr. Abbas Maitham Jaber University of Technology/ the Production Engineering and Metallurgy Department (Member and Supervisor) The student received a rating of (very good, high).
|
||||||||
Discussion of a master’s thesis in production engineering
|
||||||||
|
Discussion of a master’s thesis in production engineering
|
||||||||
|
A master's student in the Production Engineering and Metallurgy Department /Production Engineering Branch was discussed (Hibatullah Jassim Haseeb) for her message tagged with:- Experimental investigation of sheet spring back using hydromechanical deep drawing process With the specialty of production engineering, in the hall of the late Professor Dr. Ibrahim Mahmoud Mansour in the department on Monday, 11/2/2023, the discussion committee consisted of those whose names are listed below: - Dr. Aseel Hamad Abdel University of Technology / the Production Engineering and Metallurgy Department (Chairman) Prof. Dr. Khaleda Kazem Mansour. University of Technology/ the Production Engineering and Metallurgy Department (Member) Mother. Dr. Jalil Jabbar Shukr, University of Technology/Department of Production and Minerals Engineering (Member) Prof. Dr. Ali Abbar Khalif, University of Technology / the Production Engineering and Metallurgy Department (member and supervisor) Mr. Dr. Bassem Ajeel Abbas University of Babylon/College of Engineering (Scientific evaluator ) Prof. Dr. Ali Hussein Muhammad. Al-Nahrain University / College of Engineering (Scientific evaluator) Hoda Abd Ali University of Baghdad / College of Education (Linguistic Evaluator) The student received a grade of (very good).
|
||||||||
Discussion of a master’s thesis in metallurgical engineering
|
||||||||
|
Discussion of a master’s thesis in metallurgical engineering |
||||||||
|
A master’s student in the Production Engineering and Metallurgy Department / Metallurgy Engineering Branch (Khaldoun Khalaf Jalloud) was discussed for his thesis titled:- Effect of friction stir processing on the microstructure and corrosion properties of Al-matrix composite
With the specialty of metallurgical engineering, in the hall of the late Professor Dr. Ibrahim Mahmoud Mansour, on Thursday, 10/26/2023, the discussion committee consisted of those whose names are listed below:- Mr. Dr. Sami Ibrahim Jaafar / University of Technology / Production Engineering and Metallurgy Department (Chairman) Khairiya Salman Hassan / Central Technical University / Baghdad Institute of Technology (Member) A.M.D. Bahaa Sami Mahdi / University of Technology / Production Engineering and Metallurgy Department (Member) Mr. Dr. Mona Khudair Abbas / University of Technology / Production Engineering and Metallurgy Department (member and supervisor) Dr. Mahdi Matar Hanoun / University of Technology Production Engineering and Metallurgy Department (member and supervisor) The student received a grade of (very good) after completing the required modifications.
|
||||||||
Discussion of a master’s thesis in industrial engineering
|
||||||||||
|
Discussion of a master’s thesis in industrial engineering
|
||||||||||
|
The master’s student in the Production Engineering and Metallurgy Department /Industrial Engineering Branch (Ban Hassouni Hamid) was discussed for her thesis titled:- (Maintainability design factors for a reliable mechanical product)
With the specialty of industrial engineering, in the hall of the late Professor Dr. Ibrahim Mahmoud Mansour in the department on Wednesday, 10/25/2023. The discussion committee consisted of those whose names are listed below: - Prof. Dr. Sattar Abdel Mutlak / Anbar University / College of Engineering (Chairman) Prof. Attia Abdel Kazem Jario/University of Technology/ the Production Engineering and Metallurgy Department (Member) M.D. Amjad Barzan Abdel Ghafour / University of Technology / the Production Engineering and Metallurgy Department (Member) A.M.D. Lama Adnan Hamid / University of Technology / the Production Engineering and Metallurgy Department (supervisory member) A.M.D. Omar Hashem Hassoun / University of Technology the Production Engineering and Metallurgy Department (supervisory member) Mr. Dr. Hussein Salem Kaitan / Warith Al-Anbiya University / College of Engineering (scientific evaluator) Mr. Dr. Wathiq Hayawi Laith/ University of Sumer/ Faculty of Administration and Economics (scientific evaluator) Prof. Dr. Omar Farouk Lotfy / University of Technology / the Production Engineering and Metallurgy Department (linguistic evaluator) The student received a grade of (very good).
|
||||||||||
Holding a solidarity symposium with Palestine
|
||||||||||||||
|
Holding a solidarity symposium with Palestine
|
||||||||||||||
|
Under the auspices of the Presidency of the University of Technology and the Department of Production and Mineral Engineering, a solidarity symposium was held entitled (Jerusalem Road Passes through Karbala) organized by (Techno Student Body) on Wednesday, 10/25/2023, in the hall of the late Professor Jassim Al-Hayani, in the presence of the Head of the Department of Production and Mineral Engineering, Prof. M.D. Muhannad Muhammad Hussein, the leader of the Popular Mobilization Forces, Hajj Abu Diaa Al-Saghir, a number of teachers and employees of the University of Technology, and a large number of students. The symposium opened with a recitation of verses from the Holy Qur’an, recited by the reciter Sheikh Hossam Al-Minshdawi, followed by a speech by the organization’s scouts, then a lecture by Sheikh Mustafa Al-Ansari, which addressed various topics aimed at supporting the Palestinian cause and condemning it. The unjust aggression against the Gaza Strip. The symposium concluded by taking souvenir photos.
|
||||||||||||||
A faculty member from the Production and Metallurgy Engineering Department participates in an international conference
|
||||||||
|
A faculty member from the Production and Metallurgy Engineering Department participates in an international conference
|
||||||||
|
Dr. Sami Ibrahim Jaafar, a faculty member from the Production and Metallurgy Engineering Department, share with a research tagged with:- Electrochemical behavior and corrosion properties of bourdon canned meat At the Third International Conference on Nanoscience and Technology held by the University of Tehran in cooperation with some Iraqi universities (Baghdad, Kufa, Karbala, Basra, Babel, Wasit and Diyala) and some industrial companies In the field of nanotechnology for the period from 26 to 28 April 2023 at the University of Tehran. The conference axes included research in (nano chemistry, nano physics, nano electronics, nano bio, and nano technology And nano in food, medicine and biological nano .
|
||||||||
Scientific assistant to the head of the Production and Metallurgy Engineering Department , a member of the committee to discuss a master's thesis at Salah al-Din University in Erbil
|
||||||
|
Scientific assistant to the head of the Production and Metallurgy Engineering Department , a member of the committee to discuss a master's thesis at Salah al-Din University in Erbil
|
||||||
|
Dr. Muhannad Muhammad Hussein, the scientific assistant to the head of the Production and Metallurgy Engineering Department , participated in the membership of the discussion committee for the master's thesis of the student (Raven Rizgar Muhammad) from the College of Engineering at Salahaddin University / Department of Mechanical and Mechatronic Engineering in Erbil For her letter tagged with:- 3D printing of carbon fiber composites using stereo lithography method
On Wednesday, corresponding to 4/26/2023, the discussion committee consisted of:- Dr. Sarkot Rustam Hassan/ Sulaymaniyah Technical University/ College of Engineering... as Chairman Dr. Muhannad Muhammad Hussain/ University of Technology/ Production and Metallurgy Engineering Department , ……… Member Dr. Muhammed Taher Muhammed Saeed/ Salahaddin University/ Faculty of Engineering…… Member Dr. Abdel-Qader Ali Abdel-Qader/ Salah El-Din University/ College of Engineering……. Supervising member The discussion took place in the (Sherko Baban) hall in the Department of Mechanical and Mechatronics Engineering in the College of Engineering at Salahaddin University, and the student got a grade of (very good).
|
||||||
Two faculty members from the of Production and Metallurgy Engineering Department obtain a professorship degree
|
||||||
|
Two faculty members from the of Production and Metallurgy Engineering Department obtain a professorship degree
|
||||||
|
The University Committee for Scientific Promotions at the University of Technology decided, with the approval of the University President, Prof. Dr.Ahmed Mohamed Hassan Al-Ghabban. Promotion of two teachers from the rank of assistant professor To the rank of professor, they are Dr. Ali Abbar Khalif and Dr. Iman Adnan Anoun Mahdi. We congratulate them on their promotion and valuable scientific achievement.
|
||||||
A scientific visit to the second gas station south of Baghdad
|
||||||||||
|
A scientific visit to the second gas station south of Baghdad
|
||||||||||
|
The Production Engineering Branch, one of the branches of the Production Engineering and Metallurgy Department, organized a scientific visit to the second gas power station of South Baghdad, accompanied by students of the third stage in the branch, on Monday, 3/20/2023, under the supervision of the branch head. Dr. Saad Karim Shather and a number of the branch's faculty member. The visit included giving a theoretical lecture about the station and its affiliated units by the engineers working in it, and the principle of the gas turbine and its associated control systems. The students made a field tour of one of the station's units and got acquainted with its parts, how it works and generates electric power, and visited a number of engineering workshops inside the station. One the other side, the supervisor of the scientific visit and the accompanying teaching delegation expressed their thanks and gratitude to the station's management and its employees for their efforts to provide all the needs and provide all facilities for the success of this visit.
|
||||||||||
More...
Distinguished participation of the mining and mineral extraction engineering branch in the exhibition of the Ministry of Industry and Minerals Technology
|
||||||||||
|
Distinguished participation of the mining and mineral extraction engineering branch in the exhibition of the Ministry of Industry and Minerals Technology
|
||||||||||
|
Dr. Amjad Ibrahim Fadel Head of the Mining Engineering Branch and Mineral Extraction, one of the branches of the Production Engineering and Metallurgy Department Participated in technological incubator projects to the labor market, an exhibition for the products of creative university students, and a market for displaying handicrafts, which was set up by the Ministry of Industry and Minerals under the auspices of the Minister of Industry and Minerals, which carried the slogan. (Youth is a permanent, specific and inexhaustible treasure) and they participated in a graduation project entitled Design and manufacturing of field and laboratory digital point load tester. The project received the attention and praise of the minister and the visitors of the exhibition. That was on Tuesday 3/14/2023 in the main hall of the Industrial Research and Development Authority of the Ministry of Industry and Minerals.
|
||||||||||
Discussion of a PhD thesis in the Production Engineering and Metallurgy Department
|
||||||||||
|
Discussion of a PhD thesis in the Production Engineering and Metallurgy Department
|
||||||||||
|
A PhD student in the Production Engineering and Metallurgy Department / Metallurgy Engineering Branch (Ahmed Musa Marhab) discussed his thesis tagged with:- Evaluation of Mechanical Preparation and Corrosion of Mg alloys /Al2O3 composites
With a specialization in Metallurgical Engineering, in the hall of the late Prof. Dr. Ibrahim Mahmoud Mansour in the department on Wednesday 3/1/2023, the discussion committee consisted of the women whose names are listed below:-
5Dr. Ali Mazhar Rasan - University of Technology / the Production Engineering and Metallurgy Department / Metallurgy Engineering (Member)
The student obtained a grade of (very good).
|
||||||||||
The head of the Production Engineering and Metallurgy Department inspects the progress of the exams for the first semester
|
||||||||
|
The head of the Production Engineering and Metallurgy Department inspects the progress of the exams for the first semester
|
||||||||
|
The head of the Production Engineering and Metallurgy Department, Prof. Dr. Mona Khudair Abbas An inspection tour to monitor the progress of exams for the first semester of the annual and semester academic systems (courses). Thursday morning 1-27- 2023 and reviewing the procedures followed in the attendance exams for the department’s students. The head of the department praised the efforts of the examination committees and the department's faculty members In their keenness to ensure the success of exams for students to make the scientific march of the department a success.
|
||||||||
A faculty member from our department obtains the degree of professor by a decision of the Central Committee for Scientific Promotions at the University of Technology
|
||||||
|
A faculty member from our department obtains the degree of professor by a decision of the Central Committee for Scientific Promotions at the University of Technology |
||||||
|
A faculty member from our department obtains the degree of professor by a decision of the Central Committee for Scientific Promotions at the University of Technology .Dr. Ahmed Mohamed Hassan Al-Ghabban, President of the University of Technology, promoting the faculty member in Production Engineering and Metallurgy Department, Assistant Professor Dr. Firas Farhan Sayed, to the rank of Professor, with all the rights and privileges. This rank entitles him. We congratulate Dr. Firas Farhan Syed for this promotion and valuable scientific achievement.
|
||||||
