|
Source : Media Section |
اخبار القسم en
Head of Production Engineering Branch Scientific Resident for Springer International for the years 2020-2021
|
|||||
|
Head of Production Engineering Branch Scientific Resident for Springer International for the years 2020-2021
|
|||||
|
Dr. Shukri Hamid Ghadeeb, Head of the Production Engineering Branch / Production Engineering and Metallugy Department, obtained certificates as a scientific resident for the international magazine Springer, with 16 research papers for the year 2020 and 15 papers for the year 2021 This is for his participation and efforts in evaluating scientific research. .
|
|||||
Head of the Mining Engineering and Metal Extraction Branch Supervising member of the Master's thesis discussion committee in the Department of Civil Engineering at the University of Technology
|
|||||||||
|
Head of the Mining Engineering and Metal Extraction Branch Supervising member of the Master's thesis discussion committee in the Department of Civil Engineering at the University of Technology
|
|||||||||
|
|||||||||
A scientific visit to the Iraqi Geological Survey
|
|||||||||||
|
A scientific visit to the Iraqi Geological Survey
|
|||||||||||
|
|||||||||||
A faculty member from the Production Engineering and Metallurgy Department participates in a committee to discuss a master's thesis at the College of Engineering at the University of Kufa
|
||||||||
|
A faculty member from the Production Engineering and Metallurgy Department participates in a committee to discuss a master's thesis at the College of Engineering at the University of Kufa
|
||||||||
|
Participate Dr. Aqil Sabri Baden, a faculty member in the Production Engineering and Metallurgy Department / Computer Aided Design and Manufacturing Engineering Branch, in the discussion of the master’s thesis for the student (Thanaa Abdel Salam)
From the College of Engineering at the University of Kufa, whose address is:-
(Microstructuer and fracture chracteristics of silicon carbide reinforced aluminum composite under different heat treatment
conditions and its suitability for incremental sheets forming)
The committee was composed, in addition to the membership of a Dr. Aqil Sabry, the body of:-
Dr. Abdul Rahim Kazem Abd Ali / University of Babylon / College of Materials Engineering….. President
Dr. Iman Jaber Abed / University of Kufa / College of Engineering ..... Member
Dr. Shaker Mazloum Kateh / University of Kufa / College of Engineering.. an honorable member.
The message was reported with a grade of (Very Good).
|
||||||||
Discussion of a master's thesis in production engineering
|
||||||||||
|
Discussion of a master's thesis in production engineering
|
||||||||||
|
A master's student in the Production Engineering and Metallurgy Department / Production Engineering Branch (Anwar Qassem Abdel Nabi) was discussed about his thesis tagged with:- (Study the effect of changing voltages values in the cutting process of electrical discharge machining) And with a specialization in production engineering, in the hall of the late Prof. Dr. Ibrahim Mahmoud Mansour in the department. The discussion committee consisted of the persons listed below:-
Dr. Saad Karim Shather, University of Technology / Department of Production and Metallurgy Engineering (Head) Dr.. Azzam Sabah Hamid, Wasit University / College of Engineering (Member) Dr. Waqas Saad Khudair, University of Technology / Production Engineering and Metallurgy (Member) Mr. Dr. Shukri Hamid Ghadeeb, University of Technology/ Production and Metallurgy Engineering Department (Honorable Member) Each of the Dr. Saad Hamid Al-Shafei, University of Babylon / College of Engineering, and Prof. Mustafa Ahmed Ragab, Middle Technical University / Baquba Institute, scientific assessors The linguistic evaluator, Dr. Abbas Maytham Jaber, University of Technology / Production Engineering and Metallurgy Department The student received a grade (Very Good).
|
||||||||||
The Production Engineering Branch, in cooperation with the Guidance Unit, holds a workshop
|
||||||||||
|
The Production Engineering Branch, in cooperation with the Guidance Unit, holds a workshop
|
||||||||||
|
In cooperation with the Psychological Guidance and Educational Guidance Unit, the Production Engineering Branch in the Production Engineering and Metallurgy Department held a workshop entitled: (Between the student and the professor: problems and solutions) on Tuesday morning 12/14/2021 in the central hall of the department. The workshop began with a recitation of verses from the Honorable Qur’an, followed by a brief speech by the head of the Production Engineering Branch, Prof.Dr. Shukri Hamid Ghadeeb stressed the importance of uniting the relationship between the student and the professor on the one hand, and between him and the department administration on the other. Then, I gave a lecture entitled: (The Reasons for the Student’s Delay and Stumbling During the Academic Progress and Methods of Resolving It) and it was prepared by the Lecturer Production Branch course. Majed Hamid and presented by Dr. Adel Ghanem. The head of the psychological counseling and educational guidance unit in the department, and then the discussion was opened, opinions and ideas were put forward, and the most important obstacles facing the educational process, he started with a brief speech to the head of the department, Prof. Mona Khudair Abbas indicated in it that the department’s presidency is open to students in providing facilities in their university studies. In addition to a number of fuclty who participated in the dialogue, on their part, a number of students expressed some opinions and mentioned some obstacles and problems they encounter that require consideration and clarified appropriate solutions to them. The conclusion of the workshop thanked the head of the branch, Prof. Dr.Shukri Hamid Ghadeeb to all the participants and attendees, and souvenir photos were taken.
|
||||||||||
Discussion of a PhD thesis in Production Engineering
|
||||||||
|
Discussion of a PhD thesis in Production Engineering
|
||||||||
|
A PhD student in the Production Engineering and Metallurgy Department / Production Engineering Branch (Mohamed Sattar Jabbar) was discussed about his thesis tagged with:- (Flastic-Plastic forming of revolved shell using experimental and numerical techniquescs) The specialization of Production Engineering, at exactly nine o’clock in the morning on Thursday, 9/12/2021, and in the hall of the late Prof. Dr. Ibrahim Mahmoud Mansour in the department. The discussion committee consisted of the gentlemen listed below:- Dr. Faraj Mahal Muhammad, University of Technology/ Electromechanical Engineering Department..... (Head) Dr. Adel Abbas Alwan, retired... (Member) Dr. Muthanna Hamza Saadoun, University of Technology / Department of Mechanical Engineering..... (Member) Dr. Ali Abbar Khalif, University of Technology / Production Engineering and Metallurgy Department .... (Member) Dr. Aseel Hamad Abd, University of Technology / Production Engineering and Metallurgy Department ….. (Member) Dr. Mohsen Jaber Jowej, Al Farahidi University / College of Engineering.. (Supervisor) Dr. Adnan Ibrahim Muhammad, University of Technology / Production Engineering and Metallurgy Department …… (Supervisor) The scientific component of the thesis was Dr. Najm Abdul-Amir, University of Babylon / Department of Materials Engineering…..a scientific component first and Dr. Iyad Murad Takhakh, Al-Nahrain University / College of Engineering…..a second scientific component And the linguistic component of the message was Dr. Samir Ali Amin, University of Technology / Department of Mechanical Engineering The student received a grade (Very Good).
|
||||||||
A faculty members from the Department of Production and Metallurgy Engineering chairs a committee to discuss a doctoral thesis at the College of Materials Engineering at the University of Babylon
|
||||||
|
A faculty members from the Department of Production and Metallurgy Engineering chairs a committee to discuss a doctoral thesis at the College of Materials Engineering at the University of Babylon
|
||||||
|
Headed by Prof. Dr.Sami Abu Al-Noon Ajeel, a faculty member in the of Production Engineering and Metallurgy Department / Metallurgical Engineering Branch, discussing the doctoral thesis of the student (Sarah Abdul-Amir Abdul-Mahdi) from the Department of Materials Engineering at the University of Babylon, which has the title:- (Investigation of high temperature corrosion and mechanical properties for fan in turbin coated in thermal generation station)
In addition to Prof. Dr. Sami Abu Al-Noon, the committee consisted of:- Mr. Dr. Abbas Khammas Hussein / University of Technology / Department of Materials Engineering….. Member Dr. Ali Hobi Halim / University of Babylon / College of Materials Engineering…..member Dr. Haider Hassan Jaber / University of Babylon / College of Materials Engineering... Member Dr. Zuhair Taleb Khalif / Bayle University / College of Materials Engineering.. Member Dr. Kazem Fanteel Abdul-Hussein / University of Babylon / College of Materials Engineering... Supervisor Dr. Hassan Shaker Magdy / Future College of the University... Supervisor It is reported that the thesis was accepted with a grade of (Very Good).
|
||||||
Faculty members from the Production Engineering and Metallurgy Department take part in the Sixth Oil and Gas Conference
|
||||||||||
|
Faculty members from the Production Engineering and Metallurgy Department take part in the Sixth Oil and Gas Conference
|
||||||||||
|
Under the patronage of the Minister of Oil, Ihsan Abdul-Jabbar Ismail, the work of the sixth Iraq International Oil and Gas Conference was released in Baghdad at the headquarters of the Oil Research and Development Center, in person and by default via the Zoom application, for the period from 29-30 November, with the participation of (70) researchers from inside and outside Iraq, distributed On the axes of the conference within the days of the session, where each of the faculty members , Dr. Ahmed Salloum Abbas and Dr. Eman Adnan Aoun and Dr. Firas Farhan Sayed with their research tagged with: ((Studying the properties of nano zinc oxide coated on type 37-2 steel to protect against corrosion and prepared using pulsed laser deposition technology and used in oil storage applications)). Where the research orientation represents the treatment of one of the most important industrial problems in the oil sector, which is corrosion, as the aim of the research was to reduce the damages of this industrial problem, which represents a waste of time and money. A video recording of the speech of the Minister of Oil was shown, in which he thanked the organizers of the conference and the management of the Research Center for organizing such scientific events that serve the oil industry. On the other hand, the Undersecretary for Liquidation Affairs, Dr. Hamid Younis Al-Zawba’i, gave a presentation entitled (The Ministry’s View of the Gas Industry in Iraq), after which the official spokesman for the conference, former Oil Minister Thamer Abbas Al-Ghadban, gave a presentation on (Energy Prospects in Iraq, while the Ministry’s advisor gave Oil and Energy Affairs Dr. Abdul-Baqi Khalaf Ali gave a presentation entitled (Iraq’s Road Map for the Transition to Sustainable Energy 2030), after which the conference sessions started with two sessions distributed between Baghdad Hall and Al-Rafidain Hall with the participation of researchers in attendance during the first and second day of the conference and at the Oil Research and Development Center Iraqi Thought Center for Energy Studies .
|
||||||||||
A scientific visit for production engineering students to the Central Library at the University of Technology
|
||||||
|
A scientific visit for production engineering students to the Central Library at the University of Technology
|
||||||
|
In continuation to work within the initiative of the rector of the University of Technology for cooperation between the scientific departments and the central library at the university, and to complement the series of scientific visits for students of the Production Engineering and Metallurgy Department, the Production Engineering Branch organized one of the department’s branches on Monday, 6-12-2021, a scientific visit for students of the second and third stages to the library Central, as part of the extra-curricular activities of the Production Engineering and Metallurgy Department, which were confirmed by the Presidency of the University, and the students were accompanied by Dr. Raed Rashid and Dr. Abdullah Hamad and Dr. Khaleda Kazem and lecture The Thkra of Mahdi and lecture Majed Hamid and m. Assistant lecture Asaad Ali and M. NS. Lujain Hussein, and a number of library officials and employees were received by them. The students were briefed about the library’s sections and halls, how to search for resources, issue an identification card for affiliation with the library, and the reading room, which has a free internet service during working hours, which it provides to students to support the scientific process.
|
||||||
More...
The Production Engineering and Metallurgy Department hosts the University of Technology Student Debating Festival
|
||||||||||||
|
The Production Engineering and Metallurgy Department hosts the University of Technology Student Debating Festival
|
||||||||||||
|
Under the backing of the rector of the University of Technology, Prof. Dr.Ahmed Mohamed Hassan Al-Ghabban, Production Engineering and Metallurgy Department, hosted the University of Technology Festival for Student Debates in its second session in the hall of the late Mr. Jassim Al-Hayani. The inauguration was on Sunday 28/11/2021 in the presence of the representative of the rector of the University, Prof. Dr.Hussein Hamid Karim, assistant president of the university for administrative affairs, and a number of heads of departments and faculty member . It began with the national anthem and recitation of verses from the Holy Quran, then the speech of the head of the Production Engineering and Metallurgy Department, Prof. Dr.Mona Khudair Abbas, welcoming the attendees and marking the start of the competitions in which 16 departments representing all departments of the University of Technology are divided into four groups. The first group included the departments of Production, Metallurgy, Mechanical Electrical Engineering, and Oil Technology. The second group includes biomedical engineering, control and systems engineering, architecture and applied sciences. The third group included the departments of civil engineering, laser engineering, optoelectronics, communications engineering and computer science, and the fourth group included the departments of materials, electromechanical, chemical and computer engineering. The festival competitions, whose questions are divided into information in various fields of science, engineering, history, geography, puzzles, and others, began with competitions on the first day, in which the first group qualified for the oil technology department. On the second day, the second group qualified for the applied sciences department. Laser and optoelectronics On the fourth day, he qualified for the fourth group, the Chemical Engineering Department. The final competitions were on Sunday 5/12/2021 and began with a speech by the representative of the rector of the University of Technology, Prof. Dr.Haider Abed Dahd, assistant president of the university for scientific affairs and graduate studies. Then competitions began between the four qualified departments, which resulted in the Chemical Engineering Department winning the first place, the Petroleum Technology Department in second place, and the Applied Sciences Department in third place. The prizes were distributed to the winners and memorial photos were taken. During the five-day festival, the students took part by asking them questions and presenting prizes to the winners
|
||||||||||||
Head of Production Engineering Branch Supervising a Master's Thesis from Karabuk University of Turkey
|
||||||||
|
Head of Production Engineering Branch Supervising a Master's Thesis from Karabuk University of Turkey
|
||||||||
|
Within the scope of promoting scientific cooperation between the University of Technology and international universities, Prof. Shukri Hamid Ghadeeb, Head of the Production Engineering Branch in the Department of Production and Metallurgy Engineering, supervising the master’s student, Shahd Hatem Hassan, at Karabuk University/ Turkey, Department of Mechanical Engineering, with the participation of (Dr. Bilaloglu) on the tagged master’s thesis. B: (The Effect of Current on White Layer Thickness in Electrical Discharge Machining Process), Where this study is one of the important practical studies in the field of non-traditional cutting operations. It is reported that Assistant Prof. Dr. Shukri Hamid Ghadeeb is a cutting specialist and was chosen to supervise this thesis because he has a very specific expertise in electric spark cutting (EDM).
|
||||||||
Participation in an international conference for engineering and materials science in Dohuk
|
||||||||
|
Participation in an international conference for engineering and materials science in Dohuk
|
||||||||
|
Dr.. Muhannad Qusay Abboud, a lecturer in the Production Engineering Branch participated at the Fourth International Conference on Materials Science and Engineering, which was held at the University of Dohuk, with his research tagged with: (Detection of Objects Geometries and Colors using MATLAB) Also, Mustafa Nashaat Gohar, PhD student/Metallurgy engineering student, participated electronically via the Google platform, with his research tagged with (Composition and characterization of the modified German coating with Altria particles). Nanoparticles on nickel alloy 625) under the supervision of Prof.Dr. Mona Khudair Abbas and Assistant Prof. Dr. Esraa Abdel Qader Aziz, on the other hand, a doctoral student Hala Ali Habib. / production engineering in the work of the conference at the level of attendance also has been participated.
|
||||||||
The Production Engineering and Metallurgy Department hosts the annual Google Conference (Devfest 2021)
|
||||||||||
|
The Production Engineering and Metallurgy Department hosts the annual Google Conference (Devfest 2021)
|
||||||||||
|
In cooperation with the Google Developers Club - Iraq and the Research and Development Division in the Office of the Scientific Assistant, the Production Engineering and Metallugy Department / University of Technology hosted the conference activities Google's International Devfest 2021 Developer Festival on Friday 19/11/2021, an annual technical event organized by developer groups Google, with the aim of providing conferences and workshops for students, developers, professionals and anyone with an interested for technology.In the presence and patronage of the rector of University of Technology Engineering Prof. Dr. Ahmed Al-Ghabban and the presence of the Director General of the Department of Scientific Care in the Ministry of Youth and Sports, Dr. Ahmed Saad Aliwi and administrative assistant, Assistant prof. Dr. Hussein Hamid Karim and Head of the Production Engineering and Metallurgy Department, Prof. Dr. Mona Khudair Abbas and a number of fans of technology and its development.It is noteworthy that this gathering, supported by Google, is concerned with discussing the latest developments in programming from systems and applications that contribute to the development of knowledge horizons for specialists. The Devfest Forum is held annually, as Google chooses the perfect place, which is required to be an incubator for science, technology and young energies. What distinguishes this year’s 2021 forum is the University of Technology’s hosting of this event for the first time at the level of universities in Iraq after it has achieved all the requirements for success as the number The first in science and technology and the first incubator for innovations ,distinguished energies that emerged through the Innovative Students Club of the University of Technology. The activities of the first day of the event were: 1-Discussions about the latest programming languages in the main hall of the Department of Production Engineering and Metallurgy. 2- A software competition in which members and students of the University of Technology will participate, which will be held in the Innovative Students Club. 3- Presenting software projects, innovations, arts and handicrafts in the university corridors.
|
||||||||||
