Source : Media Section |
A work team from the Production Engineering and Metallurgy Department obtains a patent in deposition of titanium on steel using nanotechnology for direct deposition (hot metal threads) in the oil sector
|
|||||||
A work team from the Production Engineering and Metallurgy Department obtains a patent in deposition of titanium on steel using nanotechnology for direct deposition (hot metal threads) in the oil sector
|
|||||||
All of Dr. Amin Dawai Thamer, a former faculty member in the Production Engineering and Metallurgy Department, and Dr. Bahaa Sami Mahdi, a faculty member in the Production Engineering and Metallurgy Department / Metallurgy Engineering Branch, and their doctoral student, Na'am Fawzi Muhammad Ali, obtained a patent for titanium deposition on steel using nanotechnology for direct deposition (hot metal threads) in the oil sector. The direct deposition method is a new and highly efficient method for precipitating titanium in particular compared to all other methods represented by direct current sputtering deposition or even using the frequency and high voltage atomization deposition method using magnetic field. In short, the direct deposition method is the cheapest and simplest method for depositing the hardest metal on solid surfaces. The method simply includes heating the titanium thread to a temperature ranging from 900 to 1200 degrees Celsius inside a highly vacuumed glass chamber (1X10-4mbar) and when degassing using a rotary pump only. Discharging takes place in two steps, the first is the degassing and then the introduction of the Arcon gas, and the second includes the discharge of the Arcon gas to ensure that there is no oxygen, which will be very harmful to the process. When the temperature reaches the required degree, the titanium atoms are directly transferred from the thread by sublimation and adhesion to any adjacent surface without the need to reach the liquid state and at a sedimentation speed no less than six times faster than the most powerful devices for direct current spraying.
|
|||||||
Discussion of a PhD thesis in metallurgy engineering
|
||||||||
Discussion of a PhD thesis in metallurgy engineering
|
||||||||
A doctoral student in the Production Engineering and Metallurgy Department / Metallurgy Engineering Branch (Na’am Fawzi Muhammad Ali) discussed her thesis tagged with:- (Enhancement of Petroleum Pipelines surface by Ti base multilayers nanostructured coating performed by gas phase process) And in the field of metallurgy engineering, on Thursday corresponding to (12/15/2022) in the hall of the late Professor Ibrahim Mahmoud Mansour in the department. The discussion committee consisted of those whose names are listed below:- Dr. Muhammad Halil Hafez - President of the University of Basra Oil and Gas - Chairman Dr. Ayad Murad Takhakh - Al-Nahrain University / College of Engineering - Member Dr. Firas Farhan Sayed - University of Technology / Production Engineering and Metallurgy Department - Member Dr. Mariam Abdel-Azim Baqer - University of Technology / Production Engineering and Metallurgy Department - Member Dr. Ali Munther Mustafa - University of Technology / Production Engineering and Metallurgy Department - Member Dr. Amin Dawai Thamer - retired - member and supervisor Dr. Bahaa Sami Mahdi _ University of Technology / Production Engineering and Metallurgy Department - member and supervisor Dr. Ibtihal Abdul Razzaq Mahmoud - University of Technology / Department of Mechanical Engineering - Scientific evaluated Dr. Iqbal Muhammad Saeed _ University of Babylon / College of Materials Engineering _ Al-Alamy Dr. Samir Ali Amin - retired - linguistic evaluated The student obtained a grade (excellent).
|
||||||||
The Industrial Engineering Branch makes a scientific trip to the thermal Al Doora power station
|
||||||||
The Industrial Engineering Branch makes a scientific trip to the thermal Al Doora power station
|
||||||||
A delegation from the Industrial Engineering Branch, one of the branches of the Production Engineering and Metallurgy Department , headed by Dr. Amjad Barzan Abdel Ghafour, head of the branch, and a number of the branch’s faculty members, in addition to the students of the third stage in it, made a scientific visit to a power station Thermal AlDoora on Sunday 11/12/2022. Where the students were briefed on the work site in the power station and linked the requirements of living in practical reality, which facilitates the absorption of theoretical lessons. The delegation was received by the specialized engineering staff at the station They explained the mechanism of work in the station and the main parts, and then accompanied him to the halls and sites of the station, starting from the main control hall to the Turbine Hall, and then its accessories from heat exchangers and condensers to the boiler. Boiler, Generator and water system that supplies and treats Tigris River water.
|
||||||||
Dahlia Abdul Hussain Ahmed
Dahlia Abdul Hussain Ahmed
Production engineering and metallurgy/ university of technology/ Baghdad
Lecturer
This email address is being protected from spambots. You need JavaScript enabled to view it..
Lecturer, Department of Production Engineering and Metallurgy, University of Technology, Baghdad, Iraq.
2001-2004 : Master's degree. Business Administration / College of Administration and Economics / Baghdad University / Iraq . 1991-1995 : Bsc. Industrial Management / Applied Sciences / University of Technology / Baghdad - Iraq .
Information Management , Business Intelligence , Knowledge Management , Data Mining .
1- The role of financial policy and strategic planning in the development of the state economy.
3- Characteristics and basic features of the financial policy in the Iraqi government.
4 - Prices Volatility and Hedging Strategy: Evidence of The Green Stock in Moscow Exchange
5 - Support environmental programs using knowledge management.
6 - University administration and ensuring the quality of education.
7- Developing human resources in universities under the concept of total quality management.
8 -Business intelligence in the development of higher education institutions.
9 - The role of data mining in increasing the performance of the organization.
1- Mining Engineering Economics and Management. 2- Engineering Statistics. 3- Industrial Management. 4- Operation Research.
Iman Adnan Annon
Iman Adnan Annon
Production engineering and metallurgy/ university of technology/ Baghdad
Prof. Dr
This email address is being protected from spambots. You need JavaScript enabled to view it..
1. Director of the Statistics Division. 2. Instructor in the department within the Mineral Engineering Branch. 3. Chair of the Human Resources Committee. 4. Member of several committees working in the department. 5. Supervisor of the fourth stage students (graduation project). 6. Supervisor of a master’s students with Professor Dr. Muhammad Jasim. 7. Member of the audit committee within the undergraduate examination committee. 8. Member of the Audit Committee within the Supreme Examination Committee. 9. Supervisor of many postgraduate students.
PhD in Metallurgical Engineering from 2012-2017 Title of Thesis: Advance Coating on 316L Stainless Steel Substrate Using an Electrophoretic Deposition , University of Technology, Department of Production Engineering and Metallurgy, Baghdad, Iraq . MSc in Metallurgical Engineering from 1998-2001 Title of Thesis: Characteristic Study of Composite Materials Al-SiC Prepared by Rapid Solidification , University of Technology, Department of Production Engineering and Metallurgy, Baghdad, Iraq . BSc in production engineering from 1994-1996, University of Technology, Department of Production Engineering and Metallurgy, Baghdad, Iraq.
1.Surface Engineering 2. Coating. 3. Biomedical and its application. 4. Heat Treatments. 5.Casting. 6.Composite materials. 7. Corrosion. 8.Powder technology.
3- Creep resistance for Al-Mg-Si reinforced with SiC, Engineering and Technology Journal, 25(2007).
11 - Nitriding of Cr electrolyses steel substrates, Engineering and Technology Journal, 26(2008).
.
1. Chemical metallurgy. 2. Production technology of Ferrous and non-ferrous alloy. 3. Mineral Extraction. 4. Heat Treatments. 5. Manufacturing Methods.
She holds certificates of appreciation during my participation in many local and international conferences (the first conference for sciences at Babylon University 2010, the first medical materials conference at Karbala University in 2016, the fourteenth international conference of the Egyptian Biological Society held in Cairo 2017, the tenth international conference on advanced materials held in Cairo in April 2018, Nanotechnology Conference at the University of Technology 2018. First conference for graduation projects / University of Baghdad / College of Engineering / Al-Khwarizmi 2019, participation in the scientific conference of Wasit University 2019, conference She holds a distinction shield as the best research at the Nanotechnology Conference held at the University of Technology in 2018.