اخبار القسم en

اخبار القسم en

Master Thesis in Metallurgy Engineering

 

   

 

Master Thesis in Metallurgy Engineering

Discussed a master's student in the field of metal extraction engineering (Aya Muhannad Kazim) has obtained a master's degree (with a full estimate) for her research tagged: -

((Extraction of rare earth elements from Iraqi phosphate ore))

On Wednesday 25/9/2019 at the Department of Production and Metallurgy Engineering at 9:00 am, the discussion committee consisted of the following:

* Assistant Prof. Dr. Fawzia Mohammed Hussein, Central Technical University / Technical College .... (Chairman)

* Assistant Prof. Dr.Raghad Hamed Hilal, University of Technology / Department of Production and Minerals Engineering .... (Member)

* Assistant Prof. Dr.Ali Munther Mustafa, University of Technology / Department of Production ... (Member)

* Prof. Dr. Mona Khudair Abbas, University of Technology / Department of Production and Minerals Engineering .... (Supervisor)

* Chief Researcher Dr. Moayad Kased Jalhoum, retired .... (supervisor)

Thank you very much, Mr. Chairman, and the distinguished members of the discussion committee for their efforts.

 

 

 

Source : Media Section
 
 

 

Faculty in the Department of Production Engineering and Metallurgy held a seminar on its participation in a conference

 

   

 

                   Faculty in the Department of Production Engineering and Metallurgy held a seminar on its participation in a conference   

 

On Wednesday morning, 25/9/2019, a seminar was held in the Hall No. (2) in the Department of Assistant Professor Prof. Luma Adnan Hameed on her participation in the 4th International Conference on Building, Construction and Environmental Engineering (BCEE4) to be held in Turkey-Istanbul. In cooperation with the Turkish Technical University for the period from 7 - 9/2019/10, where the teaching will participate in the two researches:

1- Research derived from the master thesis of the assistant lecturer Haider Naji

(Construction project planning using integration of crashing and concurrency techniques)

2 - Research derived from the master thesis of the engineer Woud Qais

(Reducing steel scrap in fabrication of steel storage tanks)

The Seminar Committee was chaired by the scientific assistant of the department, Prof. Dr. Salah Karim Jawad. In the presence of members of the scientific committee in the department and a number of lecturers.

 

 

 

 

 
Source : Media Section
 
 

 

Seminar for Graduate Studies / Master of metallurgy Engineering Branch

 

   

 

Seminar for Graduate Studies / Master of metallurgy Engineering Branch 


The branch of metallurgical engineering held a seminar session to discuss the course of graduate / master's students research and its completion rate on Monday morning, 23/9/2019, where the students briefly reviewed the most important achievements in their research and were discussed through the scientific queries raised by the graduate committee in addition to The valuable interventions by the attendees, where the seminar was chaired by Mr. scientific assistant to the Department of Assstant Prof. Dr. Salah Karim Jawad and attended by Mr. Chairman of the Department of metallurgy Engineering Prof. Dr. Mohammed Jassim Kazim and a number of teachers and associates

 

 

 

 
Source : Media Section
 
 

 

Seminar Graduate Students / Master of Production Engineering

 

   

 

Seminar Graduate Students / Master of Production Engineering

The Production Engineering Branch held a seminar session to discuss the course of graduate / master's students research and its completion rate on Sunday, 22/9/2019, where the students briefly reviewed the most important achievements in their research and were discussed by the graduate committee in addition to the valuable interventions. The seminar was chaired by Assistant prf.Dr. Salah Karim Jawad, the scientific assistant of the department.  The meeting was attended by the head of production engineering branch Assistant Prof. Dr. Aseel Hamad and a number of lecturers  and associates.

 

 

 

 
Source : Media Section
 
 

 

Master's thesis in metal engineering

 

     

Master's thesis in metal engineering


The Master's Degree in Metallurgy Engineering (Joan Yassin Kamel) was discussed and she obtained a Master's Degree (with an estimate) for her research

titled:

 

                                                              ((The effect of corrosion fatigue on failure of electric fan blades))

In the hall of the late Prof. Dr. Ibrahim Mahmoud Mansour in the department on Monday at 9 am The discussion committee consisted of the following listed

individuals:

* Prof. Dr.Hussein Jassim Al-Alkawi, University of Technology / Department of Electromechanical Engineering .... (Chairman)

*Assistant prof. Dr. Ahmed Ali Akbar Akbar, University of Technology / Department of Production and Metal Engineering .... (Member)

* Assistant prof. Dr Sarmad Taleb Najm, Nahrain University / Faculty of Engineering .... (Member)

* Prof. Dr. Sami Ibrahim Jaafar, University of Technology / Department of Production and Metal Engineering .... (supervisor)


 

 

 

 

 

 

Source : Media Section

 

Scientific participation in an international conference

 

     

Scientific participation in an international conference


PhD student assistant lecturer Khalida Kadhim Mansour in the activities of the Second International Scientific Conference (ICECCCCE), which was held at

the Northern Technical University / Technical Engineering College / Mosul scientific support from IEEE (Iraq Branch) for the period (13-14 / 2019/2) in the

province of Arbil. Where she participated in scientific research at the conference.

 

 

 

 

 

 

 

Source : Media Section

 

The holy Abbasid threshold honors the first graduates of Iraqi universities

 

     

The holy Abbasid threshold honors the first graduates of Iraqi universities


In the presence of the Secretary-General of the holy Abbasid threshold and in the presence of the Secretary General of the holy Abbasid threshold, Mr.

Ahmed Al-Safi, the Minister of Higher Education and Scientific Research, Dr. Qusay Al-Suhail, and a large number of the heads, representatives and

graduates of Iraqi governmental and private universities. The delegation of the University of Technology participated in the annual central ceremony within

the project of the National sponsor to honor the first students in the Iraqi universities, which was held on Friday (2019/2/15), congratulating the first

graduates and their families with this honor and wishing them success and success.

 

 

 

 

 

Source : Media Section

 

 

Discussion at the University of Babylon / College of Materials Engineering

 

     

Discussion at the University of Babylon / College of Materials Engineering
 

The Assistant Professor Dr. Ali Abar Khalif participated in the discussion committee at the University of Babylon / college of Materials Engineering / Mineral Engineering Department for the message of Master student (Osama Ihsan Ali) at 10 am on Thursday . The student received a master's degree with honors.

 

 

 

 

 

Source : Media Section

 

 

Second Meeting of Deans of Engineering Colleges in Iraq

 

     

 Second Meeting of Deans of Engineering Colleges in Iraq

The Head of the Department, Assistant Professor Dr. Ali Abbar Khalif, participated in the second meeting of the deans of engineering faculties in Iraq for the academic year

2018-2019, which was held under the chairmanship of Prof. Dr. Riad Hassan Al-Anbari. (2/2/2019). The meeting was attended by a large number of deans of the faculties of

engineering in Iraq, where they discussed all the paragraphs of the platform of the meeting and exchange views on many important points. The most important topics are the

ministry's directives regarding the application of the course system in Iraqi universities for the academic year 2019-2020 In addition to the discussion of many topics that will

advance the progress of the service for the process of education in the preliminary and higher studies in engineering colleges in the Iraqi government and private universities.

 

 

 


Source : Media Section

 

A member of faculty in our department participates in a local conference

 

     

A member of faculty in our department participates in a local conference

 

Dr. Hijran Zine El Abidine participated in the engineering branch of mining and mineral extraction / member of the board of directors of the General Company for Iraqi Cement and

with the help of Prof. Thamer Jassim Mohammed from the Department of Chemical Engineering at the fifth conference of the Association of Manufacturers of Cement in Iraq, held

in Baghdad - Al Rasheed Hotel on Thursday (2019/1/24) under the slogan:

                                                                            "Cement industry in Iraq a successful model to protect the national product"

The conference was held under the patronage of the Honorable Minister of Industry and Minerals Dr. Saleh Abdullah Al-Jubouri and attended by a number of heads of national

bodies, deputies, agents, consultants, general managers and a number of specialists and specialists in the cement industry in Iraq from the public and private sectors. The

conference discussed a number of things that serve the national industry and the cement industry in particular its public and private sectors and the most prominent achievement

of the achievements in the cement sector in Iraq and the obstacles and challenges facing the industry.


 


Source : Media Section
Page 1 of 6

We have 72 guests and no members online

Top