اخبار القسم en

اخبار القسم en

Discussion Master Thesis in Metallurgy Engineering

 

   

 

Discussion Master Thesis in Metallurgy Engineering

It was dicussed master student (Hanan Karam Aziz) for thesis titled 

" Effect of TiO2/SiC Addition on Mechanical Properties and Wear Resistance of Al-Mg-Si Alloy "  in Metallurgy Engineering specification and gets (completed) rating on Thursday 8/2/2018  in the  Hall of Dr. Ibrahim Mahmoud Mansour in the department at nine o'clock in the morning and the discussion committee consisted of the following listed below:

Assist. Prof. Dr. Ahmed Ali Akbar Akbar (Chairman)

Assist. Prof. Dr. Haitham Mohamed Waad Allah (Member)

Assist. Dr. Marwan Nafea Ali (Member)

Assist. Prof. Dr.  Isra Abdelkader Aziz (supervisor)

 

  

 

 

 

Source : Media Section

 


 

Honorary Ceremony for Prof.Dr. Mohamed Al-Turanji in the Department of Production and Metallurgy Engineering

 

   

 

Honorary Ceremony for Prof.Dr. Mohamed Al-Turanji in the Department of Production and Metallurgy Engineering

In the atmosphere of love and pride, the Department of Production Engineering and Metallurgy was held under the patronage of the President of the University of Technology Prof. Dr. Amin Duai Thamer honorary ceremony of Prof. Dr. Mohammad Jawad Al-Turanji, one of the pillars of the Technological University and a symbol of science and technology in Iraq on Monday, 5/2/2018 in the hall of the late Prof. Dr. Jassim Al-Hayani.
The session opened with a welcome speech from the President of the University, who praised the distinguished history of Dr. Al-Turanji and praised his outstanding role in promoting the Department of Production and Metallurgy Engineering and expressed his joy in this historic meeting with him. Mohammed Al-Turanji, in which he expressed his great gratitude and happiness in this hosting, which recalled the beautiful days he spent in the department and the University and wished the University the time of excellence and creativity and the department of scientific development and prosperity. Then the head of the department, Asst.Prof. Dr. Ali Abbar Khalif, in which he expressed his pride and appreciation to Prof.Dr. Mohamed Al-Turanjee and the need to build bridges of love and scientific and administrative communication in order to supplement the educational process and education in the department in every way. Some graduate students also contributed words of welcome, wishing Dr. Mohamed Al-Turanjee all the best, health and wellness.
The session ended with the honoring of the distinguished President of the University, prof. Dr. Mohamed Al-Turanji, in the Pioneer's Shield and a certificate of appreciation for what he has presented and is currently presenting to the scientific process through his colleagues and graduate students who follow us in his footsteps and approach to our knowledge. After the ceremony, commemorative photographs were taken for this occasion.
.
 

 

  
   

Source : Media Section


 

The head of the department in a visit to one of the University's Technological flags

 

   

 

The head of the department in a visit to one of the University's Technological flags

The Head of Department, Asst.prof.Dr. Ali Abar Khalif, pay visited Dr. Mohammed Jawad al-Turanji one of the flags of the Technological University and one of the pillars of mechanical engineering in Iraq on Saturday, 27/1/2018 where he assured his health and listened to the valuable recommendations resulting from his long experiences in teaching and management. Dr. Mohammed al-Turanji conveyed warm greetings to the head of the department and to the all of the brothers, friends, professors, colleagues and dear students at the Technological University in general and in the department of production engineering and matallurgy in particular. For his part, the head of the department called for him by healt and success.

 

  

Source : Media Section


 

Activities of the Department of Production and Metallurgy Engineering / Quality Committee

 

   

 

Activities of the Department of Production and Metallurgy Engineering / Quality Committee

Within the activities of the Department of Production Engineering and Metallurgy / Quality Committee. As directed by the head of the Department of Production Engineering and Metallurgy Asst.prof.Dr. Ali Abar Khalif .Conducting a review and evaluation of quality management systems for oil and industrial facilities.Where, the Central Authority of the Iraqi Drilling Company specialized in digging oil wells north of Baghdad was visited and the ISO 9001 quality management system and the HSE management system were inspected according to OHSAS18001. Knowing the company have the above certificates. The visit will be followed by a review of the quality and safety management system of the Chinese company Zbek specialized in drilling systems slant within the same sites. The Chairman of the Commission thanked Engineer Hassanein Technological University / Department of Production Engineering and Metallurgy for being the only specialist in these aspects of quality and peace. The Director of Quality Assurance and University Performance, Asst.prof.Dr. Abdul Khaleq Fawzi Hammoud. This is the first visit that will be followed by the conclusion of a memorandum of understanding scientific and research cooperation with the Iraqi Drilling Company in support of the scientific movement in Iraq beloved.
 

 

   
   

Source : Media Section


 

The Department of Production and Metallurgy Engineering hosts 60 students from the Rafidain Model Schools

  

 

   

 

The Department of Production and Metallurgy Engineering hosts 60 students from the Rafidain Model Schools

The Department of Production and Metallurgy Engineering received more than 60 students from the typical Rafidain schools with their educational and training cadres who came to draw the smile and gain the determination of this benevolent university from the gate of the Department of Production Engineering and Metallurgy, where their angelic voices escalated to read the national anthem (Mawtani .. Mawtani) In Arabic, English and French. In the opening of the events (the central symposium for the development of laboratory testing devices and its role in raising standards of quality and laboratory accreditation). Which was organized by the Department on Sunday, 2018/1/7, and then organized the Preparatory Committee for the symposium a program of identification of students began a visit to the laboratories of the Center for Nanotechnology Research and Advanced Materials, where the teachers and researchers of the Center explained to suit the abilities of students and their mentality, and then took them on a tour of induction laboratories of the Department of Production Engineering and of metallurgy had a beautiful impact by the minds of their kind minds to see the advanced equipment, and after a meal for the students were honored by the head of the department Assist.Prof. Dr. Ali Abar Khalif with the taking of souvenir pictures which archived for them this visit, and after the Director of Quality Assurance Department and Chairman of the Preparatory Committee. Assist.Prof. Dr.Abdul Khaleq Fawzi Hammoud said that the program adopted by the department for the development and rehabilitation of cadres working in laboratories began to focus on all segments of society, even schools and children, in order to promote the quality culture and establish its concepts since childhood, in order to serve our dear country.

 

 

   

Source : Media Section

 

 

Seminar Graduate Students of Metallurgy Engineering Branch

  

 

   

 

Seminar Graduate Students of Metallurgy Engineering Branch

The seminar was attended by the President of the University of Technology, Prof.Dr. Amin Daway Thamer, in addition to the University president deputy for administrative affairs, Prof.Dr. Sami Abu Al-Nun Ajil, in the presence of the Head of the Department, Assist. Prof. Dr. Ali Abar Khalifa, Director of the Nanotechnology Center, Prof. Dr. Mohammed Jasim Kazim, and a number of heads of branches and postgraduate students. The Seminar discussion committee was joined by: Dr. Aseel Hamad Abdul, Dr. Saad Kareem Shathar, Dr. Esraa Abdelkaderiz, and Dr. Sawsan Sabeeh Abdel Ali as well as the Head of the Division Postgraduate Studies Dr.Makarim Hazem Abdel-Kareem, where the doctoral and master's students discussed their completed research and presented several valuable interventions by the attendees, added a great benefit to the students and evaluated the course of some researches by presenting the precise scientific foundations for important aspects of their research.


.

   
   
   
   
 

Source : Media Section

 

 

The President of the University of Technology is Inspecting The Progress of The Students' Examinations in The Department

 

   

 

The President of the University of Technology is Inspecting The Progress of The Students' Examinations in The Department

The President of the University of Technology, Prof. Amin Doway Thamir, inspected the examinations of the students of the preliminary studies in the Production Engineering and Metallurgy Department on Tuesday, 1/9/2018 and accompanied by the Head of Department, Assist. Prof. Dr. Ali Abar Khalif where the President of the University of Technology listened to the views the students inquired about the nature of the questions and their suitability for the time specified for the exams and showed its valuable guidance to take into account the time and also to ensure the comprehensiveness of the questions and their clarity.

 

   

Source : Media Section

 

 

Mining and Extraction Engineering Branch Meeting

 

 

   

 

Mining and Extraction Engineering Branch Meeting

Assist. Prof. Dr. Sami Ibrahim Jafar, Head of the Mining and Extraction Engineering Branch, met with the members of the branch in the presence of the Head of the Department, Assist. Prof. Dr. Ali Abar Khalif, on Monday 8/1/2018 in the hall of Dr. Ibrahim Mansour. The head of the department discussed the questions of the members of the branch and answered them comprehensively and announced his support to complete the march of the branch through its decision to allow the graduates of the branch to apply a master in .Metals with a Bachelor's Degree in Extraction and a PhD in Metallurgical Engineering for Masters Degree Extraction

 

 

   

Source : Media Section

 

 

The head of department review the Scrutiny of post graduate examinations

 

 

   

 

The head of department review the Scrutiny of post graduate examinations

On the morning of Monday, 8/1/2018, the head of the department, Asst. Prof. Dr. Ali Abar Khalif, inspected the examinations of the first course for postgraduate students where he listened to the students' views on the nature of the questions and their conformity with the general methodology of the scientific subjects. Wishing them conciliation and success

   

Source : Media Section

 

 

The Department of Production Engineering and Metallurgy holds a scientific seminar on the development of laboratory equipment

  

 

   

 

The Department of Production Engineering and Metallurgy holds a scientific seminar on the development of laboratory equipment

Under the patronage of the President of the University of Technology, our department held on Sunday morning 8/1/2017 the seminar titled "The Central Symposium for the Development of Laboratory Testing Devices and its Role in Improving Quality Standards and Laboratory Accreditation"
The President of the University, Prof. Dr. Amin Douai Thamer, delivered a speech in which he said: The development of the equipment in the fields of mechanical, chemical, electrical, plastic and other fields has a role in supplying quality indicators and laboratory accreditation. During the seminar to be complementary to what started the Department of Production Engineering and Metallurgy in achieving the objectives of the productive university and to achieve its objectives through the importance of laboratories and the development of its equipment. Mr. Ali Abbar Khalif, the head of the department, said: "The seminar purposes to raise the performance of scientific laboratories by applying the quality standards correctly, and also to work on introducing the correct bases to achieve the optimum success of laboratory work. He also praised the continued support by Mr. President of the University to establish specialized seminars for quality, especially in the Department of Production Engineering and Metallurgy. The seminar included two sessions, the first headed by Prof. Dr. Mohammed Jassim Kazim, manager of the Center for Nanotechnology and Advanced Materials Research at the University, and Asst. Prof. Dr. Adnan Ibrahim Mohammed a teacher in the Department of Production Engineering and Metallurgy, as its Coordinator, including four lectures on the (implementation of ISO17025: in calibration and listing laboratories) Dr. Kifaya Aboud Mohammed Al-Saffar from the University of Degla College and the second lecture on "The strategic dimensions of the development of laboratory testing devices and their role in raising standards of quality and laboratory accreditation" by Dr. Abdul Khaleq Fawzi, Director of Division Quality assurance and university performance in the Department of Production Engineering and Dr. Jameel Mousa Dabbab of Mustansiriya University, Faculty of Science, and the fourth and last ("Advanced and pioneering scientific laboratories and its importance in the quality of engineering education in oil and gas specialties"). Dr. Khalid Ajami Sooker Scientific Assistant to the Head of Chemical Engineering Department at the University of Technology.
The second session will be chaired by Dr. Abdul Khaleq Fawzi, Dr. Mohannad Mohammed the Coordinator, first lecturer on the role of laboratory tests in the completion of urban projects, was presented by Dr. Hassanein Mohammed Hussein, manager of the Office of Scientific and Engineering Consultations at the University of Technology, and the second of "Laboratory Biological Laboratory Protocols Quality Tools and Reliability" Abdul-Redha Al-Bakri, Head of Environmental Technologies Department, Environmental Research Center, University of Technology, and Third, Development of Microscopes, by ASEL Basem Abdel-Hussain, Materials Engineering Department, University of Technology, and IV. Dr. Ahmed Adnan Abdul-Jabbar, Director of Quality Assurance and University Performance at the Department of Mechanical Engineering at the University of Technology and the fifth (on the quality scale of the Thomson Reuter Effect in Scientific Publishing) by Dr. Rahman Ismail Mahdi from the Center for Nanotechnology and Advanced Materials Research and Sixth The last of the advanced laboratory quality standards was delivered by Dr. Zaynab Nasser Jameel, Quality Assurance and University Performance Manager at the Department of Communications Engineering, Sanaa Abdulhadi Hafez, Chairman of the Laboratory Accreditation Committee at the Center for Energy Technology and Renewable Energies, University of Technology. Allen Force has been estimated distribution of certificates to the participants by the President of the Section
.

 

   
   

Source : Media Section

 

 
Page 6 of 7

We have 64 guests and no members online

Top