Discussion of a master's thesis in production engineering

A master's student in Production Engineering and Metallurgy Department / Production Engineering Branch (Farhan Kamel Gallab) was discussed about his thesis

tagged with: -

 Studying and Analyzing The Effect of Thermal Conductivity in Multilayer Tools on Surface Roughness and Temperature in Cutting Zone inTurningOperation

 Specializing in Production Engineering, on Thursday 10/2/2020 and at the auditorium of the late Prof. Dr. Ibrahim Mahmoud Mansour in the department.

 The discussion committee consisted of the persons listed below:-

 Dr. Abbas Fadel Ibrahim, University of Technology / Production Engineering and Metallurgy Department..... (Head)

 Dr. Suha Karim Shehab, University of Diyala / College of Engineering ..... (Member)

 Dr Raed Rashid Shweish, University of Technology / Production Engineering and Metallurgy Department ..... (Member)

 Dr. Maan Abed Tawfiq, University of Technology / Production Engineering and Metallurgy Department .... (Supervising Member)

 Dr. Salah Karim Jawad, retired... (Supervisory Member)

 The two scientific components of the thesis were: A. M.D. Ahmed Abdel-Nabi Omran, University of Technology/Mechanical Engineering Department and

 Dr. Azzam Sabah Hamid, Wasit University / College of Engineering and the linguistic component of the thesis was a Dr. Samir Ali Amin, retired

 The student received a grade (Very Good).

Source : Media Section

Discussion of a master's thesis in metallurgy engineering

A master's student in the Department of Production and Metallurgy Engineering / Metallurgical Engineering Branch (Ehsan Ali Raddad) was discussed about his thesis

tagged with:-

                                                            (Enhancement of metal surfaces by thin nanostructured coating films performed by gas phase process)

 With the specialization of Metallurgical Engineering, on Wednesday, 9/2/2022, and in the hall of the late Prof. Dr. Ibrahim Mahmoud Mansour in the department.

 The discussion committee consisted of the persons listed below:-

 Firas Farhan Sayed, University of Technology / Production Engineering and Metallurgy Department..... (Head)

 Dr. Ali Salah Hassan, University of Babylon / College of Engineering ..... (Member)

 Dr. Ahmed Salloum Abbas, University of Technology / Production Engineering and Metallurgy Department.... (Member)

 Dr. Amin Dawai Thamer, retired .... (supervising member)

 Dr. Firas Qassem Mohammed, University of Technology / Nanotechnology Center ..... (Supervising Member)

 The two scientific components of the thesis were: Dr. Muhammad Salab Hamza, Al-Isra University College

 and Dr.. Emad Saadi Abdel Karim, University of Technology / Department of Materials Engineering

 And the linguistic component of the message was a. Samir Ali Amin, retired

 The student received a grade (Very Good).

Source : Media Section

Discussion of a master's thesis in production engineering

A master's student in the Production Engineering and Metallurgy Department / Metallurgical Engineering Branch (Amir Jalil Nader) was discussed about his thesis

tagged with:-

                                                                 (Influence of water jet parameters on surface roughness and metal removal rate)

 With the specialization of Production Engineering, on Tuesday, February 8, 2022, and in the hall of the late Prof. Dr. Ibrahim Mahmoud Mansour in the department.

 The discussion committee consisted of the persons whose names are listed below:-

 Dr. Shukri Hamid Ghadeeb, University of Technology / the Production Engineering and Metallurgy Department. (Chairman)

 Dr. Mustafa Ahmed Ragab, Middle Technical University / Technical Institute / Baquba ..... (Member)

 Dr. Mohamed Medhat Hassan, University of Technology /  Production Engineering and Metallurgy Department. (Member)

 the Production Engineering and Metallurgy Department

 Dr. Saad Karim Shather, University of Technology/ Production Engineering and Metallurgy Department..... (Supervising Member)

 The two scientific components of the thesis were: A. M.D. Ali Hussein Kadhim, University of Baghdad / Al-Khwarizmi College

 and Dr. Shaker Mahmoud Musa, Technical Institute / Musayyib

  And the linguistic component of the message was a. Omar Farouk Lotfi, University of Technology / Department of Control and Systems Engineering

 The student received a grade (excellent).

Source : Media Section

Two faculty members from the Production Engineering and Metallurgy Department receive a patent

Dr.  Sami Abu Al-Noon Ajeel and Dr. Nasser Kurdi Zidan, the two faculty members  staff in the Production Engineering and Metallurgy Department  in addition to Dr.

Khaled Ajami Sukkar, a lecturer in the Department of Chemical Engineering, received a patent under the title:-

                                 (Extraction of high-purity nano-silicon from agricultural waste (rice husks) using advanced thermal technology at low temperatures)

High Purity Nanosilicon Extraction from Agriculture Waste (Rice Husks) using advanced Hydrothermal Technology at Low Temperatures

 High purity silicon nanoparticles were extracted from Iraqi agricultural waste (rice husks) in a new innovative way. Where the innovative method used the extraction

process through the use of hydrothermal processes

 Hydrothermal process (molten salt process in reduce silica)

 By manufacturing a metal vessel as a stainless steel reactor with a suitable and innovative design with an inner mold made of plastic material (Polytetrafluoroethylene) PTFE, its melting temperature is up to 750 ° C. Where the use of AlCl3 triple chloride salts was invented as a reducing solution with a reaction temperature of 190,250oC to extract high-purity silicon nanoparticles, using aluminum powder (Al) as a reducing agent for silica nanoparticles (SiO2) extracted from Iraqi rice husks by a method. Precipitation process. The purity of the produced Nano powder is controlled depending on the addition ratios of reducing medium (AlCl3) and reducing agent (Al) and the percentage of reducing substance extracted from rice husks (SiO2) in ideal proportions and controlling the ideal catalytic conditions represented by temperature and reduction time.

The best proportions of these influencing substances are (0.8:1:8)g (Al:SiO2:AlCl3). Which is followed by the chemical filtration process in a new and unique way. The (SiNPs) produced in this way is characterized by a high purity up to (99.973 wt%) as demonstrated by the results of laboratory tests using X-ray diffraction (XRD) and energy dispersive X-ray (XRF). The results of the atomic examination (AFM) conducted on the produced material also proved that (SiNPs) has a crystal size of (5-25) nanometers. On the other hand, the nanoparticles produced in this way have a high surface area that will help open up great horizons of industrial and engineering applications in all industrial fields, including the production of absorbent and treatment materials in many medical applications and the manufacture of solar cells with high efficiency and the manufacture of coatings in spacecraft, where The total surface area was (282.5 m2/g).

Source : Media Section

Discussion of a master's thesis in metallurgy engineering

A master's student in the Production Engineering and Metallurgy Department / Metallurgical Engineering Branch (Ahmed Mohamed Ahmed) discussed his thesis

(Using a nano-retardant as a green environment to improve the corrosion resistance of low-carbon steel alloys used in petroleum applications).

 (The use of nano inhibitir as green environment to improve corrosion alloys resistance o low carbon steel used in petroleum applications)

 With the specialization of Metallurgical Engineering, on Thursday, 27/1/2022, and in the hall of the late Prof. Dr. Ibrahim Mahmoud Mansour in the department.

The discussion committee consisted of the persons whose names are listed below:-

Dr. Sami Ibrahim Jaafar, University of Technology / the Production Engineering and Metallurgy Department..... (Head)

 Dr. Ali Mezher Rasan, University of Technology / Department of Production and Metallurgy Engineering..... (Member)

the Production Engineering and Metallurgy Department

Dr. Asaad Kazem Agal, Southern Technical University / Technical Institute - Architecture ..... (Member)

 Dr. Sami Abu Al-Noon Ajeel, University of Technology / the Production Engineering and Metallurgy Department... (Supervising Member)

Lecturer Mahdi Matar Hannoun, University of Technology/Department of Production and Metallurgy Engineering..... (Supervising Member)

 The two scientific components of the thesis were: Prof. Kazem Fanteel Abdul-Hussein, University of Babylon / College of Materials Engineering

 and Dr. Abbas Khammas Hussein, University of Technology / Nanotechnology Research Center

 And the linguistic component of the message was Dr. Samir Ali Amin, retired

 The student received a grade (excellent).

Source : Media Section