|
Source : Media Section |
اخبار القسم en
Discussion of a PhD thesis in the Production Engineering and Metallurgy Department
|
|||||||||
|
Discussion of a PhD thesis in the Production Engineering and Metallurgy Department
|
|||||||||
|
A PhD student in the Production Engineering and Metallurgy Department / Metallurgy Engineering Branch (Ahmed Musa Marhab) discussed his thesis tagged with:- Evaluation of Mechanical Preparation and Corrosion of Mg alloys /Al2O3 composites
With a specialization in Metallurgical Engineering, in the hall of the late Prof. Dr. Ibrahim Mahmoud Mansour in the department on Wednesday 3/1/2023, the discussion committee consisted of the women whose names are listed below:-
5Dr. Ali Mazhar Rasan - University of Technology / the Production Engineering and Metallurgy Department / Metallurgy Engineering (Member)
The student obtained a grade of (very good).
|
|||||||||
The head of the Production Engineering and Metallurgy Department inspects the progress of the exams for the first semester
|
||||||||
|
The head of the Production Engineering and Metallurgy Department inspects the progress of the exams for the first semester
|
||||||||
|
The head of the Production Engineering and Metallurgy Department, Prof. Dr. Mona Khudair Abbas An inspection tour to monitor the progress of exams for the first semester of the annual and semester academic systems (courses). Thursday morning 1-27- 2023 and reviewing the procedures followed in the attendance exams for the department’s students. The head of the department praised the efforts of the examination committees and the department's faculty members In their keenness to ensure the success of exams for students to make the scientific march of the department a success.
|
||||||||
A faculty member from our department obtains the degree of professor by a decision of the Central Committee for Scientific Promotions at the University of Technology
|
||||||
|
A faculty member from our department obtains the degree of professor by a decision of the Central Committee for Scientific Promotions at the University of Technology |
||||||
|
A faculty member from our department obtains the degree of professor by a decision of the Central Committee for Scientific Promotions at the University of Technology .Dr. Ahmed Mohamed Hassan Al-Ghabban, President of the University of Technology, promoting the faculty member in Production Engineering and Metallurgy Department, Assistant Professor Dr. Firas Farhan Sayed, to the rank of Professor, with all the rights and privileges. This rank entitles him. We congratulate Dr. Firas Farhan Syed for this promotion and valuable scientific achievement.
|
||||||
Discussion of a master's student in the Production Engineering and Metallurgy Department
|
||||||||||
|
Discussion of a master's student in the Production Engineering and Metallurgy Department
|
||||||||||
|
A master's student in the Production Engineering and Metallurgy Department / Production Engineering Branch (Mustafa Saleh Mahdi) discussed his thesis tagged with:- Study of parameters affecting on tub-bending process And in the field of production engineering, in the hall of the late Dr. Ibrahim Mahmoud Mansour in the department on Thursday 1/26/2023. The discussion committee consisted of the women whose names are listed below:- Dr.. Muhannad Muhammad Hussein / University of Technology / Production Engineering and Metallurgy Department (Chairman) Dr. Ghanem Shaker Sadiq / Al-Nahrain University / College of Engineering (Member) Dr. Jalil Jabbar Shukr / University of Technology / Production Engineering and Metallurgy Department (Member) Dr. Adnan Ibrahim Muhammad / University of Technology / Production Engineering and Metallurgy Department (member and supervisor) Dr. Mohsen Jabr Gueij / Al-Farahidi University / Mechanical Engineering (Scientific Resident) Dr. Jawad Kazem Aliwi / University of Technology / Department of Materials Engineering (scientific evaluated) Dr. Abbas Maytham Jaber / University of Technology / Production Engineering and Metallurgy Department (linguistic corrector) The student obtained a grade (excellent).
|
||||||||||
Two faculty members from our department obtain the degree of Assistant Professor by a decision of the Central Committee for Scientific Promotions at the University of Technology
|
||||
|
Two faculty members from our department obtain the degree of Assistant Professor by a decision of the Central Committee for Scientific Promotions at the University of Technology
|
||||
|
The Central Committee for Academic Promotion decided, in its third meeting for the academic year 2022/2023, which was associated with the professor’s approval Dr. Ahmed Mohamed Hassan Al-Ghabban, President of the University of Technology, promoting each of the faculty memebers in the of Production Engineering and Metallurgy Department, Dr. Nasser Kurdi Zaidan, to the rank of Assistant Professor, as well as Dr. Attia Abdelkazem Jrio, to the rank Assistant Professor with all the rights and privileges conferred on him by this rank. We congratulate them on this promotion and valuable scientific achievement.
|
||||
Discussion of a master's student in the of Production Engineering and Metallurgy Department
|
||||||||||
|
Discussion of a master's student in the Production Engineering and Metallurgy Department
|
||||||||||
|
A master's student in the Department of Production and Minerals Engineering / Production Engineering Branch (Fatima Hadi Hammoud) discussed her thesis tagged with:- Friction actuated sheet metal forming: A numerical and experimental study And with a specialization in production engineering, in the hall of the late Prof. Dr. Ibrahim Mahmoud Mansour in the department on Monday corresponding to 1/23/2023. The discussion committee consisted of those whose names are listed below:- Dr. Aseel Hamad Abd / University of Technology the of Production Engineering and Metallurgy Department (Chairman) Dr. Jabbar Qassem Jabbar / Diyala University / College of Engineering (Member) Dr. Abdullah Hamad Sankal / University of Technology / the of Production Engineering and Metallurgy Department (Member) Dr. Adnan Ibrahim Muhammad / University of Technology / the of Production Engineering and Metallurgy Department (member and supervisor) Dr. Jalil Jabbar Shukr / University of Technology / the of Production Engineering and Metallurgy Department (Member and Supervisor) Dr. Najm Abdel-Amir Saad / University of Babylon / College of Engineering (scientific evaluated) Dr. Abdul Karim Jalil Kazem / University of Babylon / College of Engineering (Scientific evaluated) Dr. Abbas Maytham Jaber / University of Technology / the of Production Engineering and Metallurgy Department (linguistic corrector) The student obtained the grade (excellent).
|
||||||||||
Discussion of a master's student in the Production Engineering and Metallurgy Department
|
||||||||
|
Discussion of a master's student in the Production Engineering and Metallurgy Department
|
||||||||
|
The master's student in the Production Engineering and Metallurgy Department / Production Engineering Branch (Ali Khaled Salman) discussed his thesis tagged with:- An Experimental study for radial over cut and material removal rate in electrochemical drilling of composite material
And with a specialization in production engineering, in the Martyr Abu Mahdi Al-Mohandes Hall in the Civil Engineering Department on Thursday, date 1/19/2023. The discussion committee consisted of the women whose names are listed below:- Dr. Saad Karim Shather / University of Technology / Production Engineering and Metallurgy Department (Chairman) Dr. Saad Mahmoud Ali / University of Technology / Department of Life Medicine Engineering (Member) Dr. Raed Rashid Shweish / University of Technology / Production Engineering and Metallurgy Department (Member) Dr. Abbas Fadel Ibrahim / University of Technology / Production Engineering and Metallurgy Department (Member and Supervisor) Dr. Ali Hussein Kazem / University of Baghdad / Al-Khwarizmi Engineering (Scientific evaluated) Dr. Shaker Mahmoud Musa / Al-Furat Al-Awsat Technical University / Musayyib Technical Institute (Scientific Corrector) Dr. Samir Ali Amin / retired (linguist) The student obtained a grade (excellent).
|
||||||||
Scientific symposium (Metal Engineering ... National Industries Portal)
|
||||||||||||||||||
|
Scientific symposium (Metal Engineering ... National Industries Portal)
|
||||||||||||||||||
|
The Assistant President of the University of Technology for Administrative Affairs, Prof. Dr. Hussein Hamid Karim, on Wednesday 1/11/2023, the specialized symposium (for the Metallurgical Engineering Branch in the Department of Production and Minerals Engineering / University of Technology) tagged:- (Metal Engineering... National Industries Portal).
The opening began with verses from the Holy Qur’an, I recited in the voice of Dr. Adel Ghanem Tohme from the department, then recited Surat Al-Fatihah on the souls of the martyrs of Iraq, then the national anthem was sung, after that the speech of the administrative assistant, followed by the speech of the department head, Prof. Dr. Mona Khudair Abbas. The symposium included five working papers in two sessions. The first session was chaired by the head of the branch, Dr. Ali Mezher and the rapporteur, M. The oldest Raghad Mohieldin from the General Company for Mining Industries included three working papers:-
After that, the work of the second session began, headed by Prof. Dr. Sami Abu Al-Noun and rapporteur Dr. Hijran Zine El Abidine (retired) and included two papers: The first on the biological use of metals and alloys was given by Prof. Dr. Mona Khudair Abbas and the second on the role of the university in achieving the goals of sustainable development, delivered by Dr. Sami Al-Rubaie, then the attendees took a break, after which certificates of thanks and appreciation were distributed to the guests of the symposium. Then the symposium concluded by reading the recommendations delivered by Dr. Sami Ibrahim Al-Rubaie, Chairman of the Preparatory Committee. The recommendations emphasized:
|
||||||||||||||||||
Discussion of a master's student in the Department of Production and Minerals Engineering
|
||||||||||
|
Discussion of a master's student in the Department of Production and Minerals Engineering
|
||||||||||
|
A master's student in the Production Engineering and Metallurgy Department/ Production Engineering Branch (Iman Saadi Abdel-Hussein) discussed his thesis tagged with:- Influence of the working gap and circumferential speed on the performance of magnetic abrasive finishing process
And in the field of production engineering, in the hall of the late Prof. Dr. Ibrahim Mahmoud Mansour in the department on Wednesday 11/1/2023. The discussion committee consisted of the women whose names are listed below:- Dr. Maan Abed Tawfiq University of Technology / Production Engineering and Metallurgy Department (Chairman) Dr. Ahmed Zaidan Muhammad / University of Baghdad / Al-Khwarizmi College (Member) Dr. Waqas Saad Khudair / University of Technology / Production Engineering and Metallurgy Department. (member) Dr. Saad Karim Shather University of Technology / Production Engineering and Metallurgy Department (Member and Supervisor) Dr. Abdullah Faraj Hoyer / University of Technology / Production Engineering and Metallurgy Department (Member and Supervisor) Dr. Suha Karim Shehab / Diyala University / College of Engineering (scientific resident) Dr. Saad Mahmoud Ali / University of Technology / Department of Life Medicine / (scientific evaluated ) Prof. Dr. Abbas Maytham Jaber / University of Technology / Department of Production and Minerals Engineering (linguistic evaluated) The student has obtained a grade (excellence).
|
||||||||||
The Industrial Engineering Branch madea scientific visit to the Pepsi Company, Baghdad
|
||||||||||||
|
The Industrial Engineering Branch madea scientific visit to the Pepsi Company, Baghdad
|
||||||||||||
|
A delegation from the Production Engineering and Metallurgy Department , Industrial Engineering Branch, made a scientific visit to PepsiCo Baghdad. Lama Adnan Al-Kindi, a.m. Zainab Allawi Ibrahim, Dr. Muhammad Ahmed Mahdi, M. Batoul Ibrahim Jamil, M. Mohammed Rajeh Jassim and M.M. Walid Khaled Abdel Qader. And that was on Wednesday, 11/1/2023, with the attendance of 22 out of 27 students, where the students were briefed on the work site of the Baghdad Pepsi Company and the production lines represented by the Shatt Al-Arab factory and the Tigris factory, where we were received by the projects department in the company and the specialized engineering staff in the company The production stations and the mechanism of work were explained. The visit included a visit to the production lines of plastic containers in the Shatt Al-Arab factory, which included the manufacture of plastic containers, then filling them, placing the private label, and assembling the packages in order to wrap them and transfer them to the warehouses in preparation for marketing them to the markets according to the sales plans. The metal cans manufacturing line was also visited in the Degla factory, which included an automated process through conveyor belts with sequential operations to disperse the metal cans and then fill them and close them with the special stopper using the pressing process. Praise be to God, the desired goal of the visit was achieved by linking the requirements of living in practical reality with academic lectures for the purpose of facilitating the absorption of theoretical lessons.
|
||||||||||||
More...
A work team from the Production Engineering and Metallurgy Department obtains a patent in deposition of titanium on steel using nanotechnology for direct deposition (hot metal threads) in the oil sector
|
||||||||
|
A work team from the Production Engineering and Metallurgy Department obtains a patent in deposition of titanium on steel using nanotechnology for direct deposition (hot metal threads) in the oil sector
|
||||||||
|
All of Dr. Amin Dawai Thamer, a former faculty member in the Production Engineering and Metallurgy Department, and Dr. Bahaa Sami Mahdi, a faculty member in the Production Engineering and Metallurgy Department / Metallurgy Engineering Branch, and their doctoral student, Na'am Fawzi Muhammad Ali, obtained a patent for titanium deposition on steel using nanotechnology for direct deposition (hot metal threads) in the oil sector. The direct deposition method is a new and highly efficient method for precipitating titanium in particular compared to all other methods represented by direct current sputtering deposition or even using the frequency and high voltage atomization deposition method using magnetic field. In short, the direct deposition method is the cheapest and simplest method for depositing the hardest metal on solid surfaces. The method simply includes heating the titanium thread to a temperature ranging from 900 to 1200 degrees Celsius inside a highly vacuumed glass chamber (1X10-4mbar) and when degassing using a rotary pump only. Discharging takes place in two steps, the first is the degassing and then the introduction of the Arcon gas, and the second includes the discharge of the Arcon gas to ensure that there is no oxygen, which will be very harmful to the process. When the temperature reaches the required degree, the titanium atoms are directly transferred from the thread by sublimation and adhesion to any adjacent surface without the need to reach the liquid state and at a sedimentation speed no less than six times faster than the most powerful devices for direct current spraying.
|
||||||||
Discussion of a PhD thesis in metallurgy engineering
|
||||||||
|
Discussion of a PhD thesis in metallurgy engineering
|
||||||||
|
A doctoral student in the Production Engineering and Metallurgy Department / Metallurgy Engineering Branch (Na’am Fawzi Muhammad Ali) discussed her thesis tagged with:- (Enhancement of Petroleum Pipelines surface by Ti base multilayers nanostructured coating performed by gas phase process) And in the field of metallurgy engineering, on Thursday corresponding to (12/15/2022) in the hall of the late Professor Ibrahim Mahmoud Mansour in the department. The discussion committee consisted of those whose names are listed below:- Dr. Muhammad Halil Hafez - President of the University of Basra Oil and Gas - Chairman Dr. Ayad Murad Takhakh - Al-Nahrain University / College of Engineering - Member Dr. Firas Farhan Sayed - University of Technology / Production Engineering and Metallurgy Department - Member Dr. Mariam Abdel-Azim Baqer - University of Technology / Production Engineering and Metallurgy Department - Member Dr. Ali Munther Mustafa - University of Technology / Production Engineering and Metallurgy Department - Member Dr. Amin Dawai Thamer - retired - member and supervisor Dr. Bahaa Sami Mahdi _ University of Technology / Production Engineering and Metallurgy Department - member and supervisor Dr. Ibtihal Abdul Razzaq Mahmoud - University of Technology / Department of Mechanical Engineering - Scientific evaluated Dr. Iqbal Muhammad Saeed _ University of Babylon / College of Materials Engineering _ Al-Alamy Dr. Samir Ali Amin - retired - linguistic evaluated The student obtained a grade (excellent).
|
||||||||
The Industrial Engineering Branch makes a scientific trip to the thermal Al Doora power station
|
||||||||
|
The Industrial Engineering Branch makes a scientific trip to the thermal Al Doora power station
|
||||||||
|
A delegation from the Industrial Engineering Branch, one of the branches of the Production Engineering and Metallurgy Department , headed by Dr. Amjad Barzan Abdel Ghafour, head of the branch, and a number of the branch’s faculty members, in addition to the students of the third stage in it, made a scientific visit to a power station Thermal AlDoora on Sunday 11/12/2022. Where the students were briefed on the work site in the power station and linked the requirements of living in practical reality, which facilitates the absorption of theoretical lessons. The delegation was received by the specialized engineering staff at the station They explained the mechanism of work in the station and the main parts, and then accompanied him to the halls and sites of the station, starting from the main control hall to the Turbine Hall, and then its accessories from heat exchangers and condensers to the boiler. Boiler, Generator and water system that supplies and treats Tigris River water.
|
||||||||
A faculty member from our department obtains a professorship degree by a decision of the University Committee for Scientific Promotions at the University of Technology
|
||||
|
A faculty member from our department obtains a professorship degree by a decision of the University Committee for Scientific Promotions at the University of Technology
|
||||
|
The University Committee for Scientific Promotions decided in its last meeting and with the approval of the President of the UniversityDr. Ahmed Muhammad Hassan Al-Ghabban, to promote the faculty in the Production Engineering and Metallurgy Department Dr. Esraa Abdel Qader to the rank of (Professor) with four faculty members from the University of Technology. We congratulate Dr. Esraa Abdel Qader, this well-deserved promotion and valuable scientific achievement.
|
||||
