اخبار القسم en

Discussing the doctoral thesis in industrial engineering

Discussing the doctoral thesis in industrial engineering

A doctoral student (Samah Ali Aufi) member of faculty in the Department of Production Engineering and Metallurgy / Industrial Engineering Branch has a public discussion about her thesis tagged with:

((Intelligence Computations for Multi-Objective Assembly Line Balancing With Stochastic Processing Time))

The major is industrial engineering in the hall of the late Prof. Dr. Ibrahim Mahmoud Mansour in the department. The discussion committee consisted of the gentlemen whose names are

listed below:

* Prof. Dr. Hussein Salem Kitan / Warith Al-Anbiya University / Department of Life Medicine Engineering (Chairman)

* Prof. Dr. Ahmed Abdul Rasoul / University of Baghdad / College of Engineering (Member)

*Assistant Prof.Dr. Sawsan Sabih Ali / University of Technology / Production Engineering and Metallurgy Department (Member)

* Assistant Prof. Dr. Zuhair Hassan Abdullah / Technical Institute / Babel (Member)

* Assistant Prof.Dr. Ibrahim Zghitoun Chlobe / Ministry of Higher Education and Scientific Research / Scientific Supervision and Evaluation Agency (member)

* Prof. Dr. Alaa Al-Din Hassan Qassem / Al-Nahrain University / College of Engineering (member and supervisor).

The thesis was accepted with complete degree, so Mubarak for the student, wishing her continued success and success, and thanks to the chairperson and members of the discussion

committee and the supervisor for their efforts .

Source : Media Section

Discussing a PhD thesis in industrial engineering

Discussing a PhD thesis in industrial engineering

A doctoral student (Rasha Jabbar Marzouk) member of faculty in the Department of Production Engineering and Metallurgy / Industrial Engineering Branch discussed her thesis tagged with:

((Computer Aided Process Planning System Development for Industrial Parts))

In the field of industrial engineering, and at the hall of the late Professor Dr. Ibrahim Mahmoud Mansour in the department, the discussion committee consisted of the gentlemen whose names are listed below:

*a. Prof. Dr.. Aladdin Hassan, University of Technology / Department of Production Engineering and Metallurgy (Chair)

*a. Assistant prof. Dr. Faiz Fawzi Mustafa, College of Engineering Al-Khwarizmi (Member)

*a. Assiatant prof. Dr.. Ahmed Zaidan Muhammad, Al-Khwarizmi College of Engineering (Member)

*a. Assistant prof. Dr.. Luma Adnan Hamid, University of Technology / Department of Production Engineering and Metallurgy (Member)

* a. Assistant Prof. Dr.Khaled Karam Abd Hadi, University of Technology / Department of Production Engineering and Metallurgy (Member)

*a. Assistant Prof. Dr.Sawsan Sabih Abd, University of Technology / Department of Production Engineering and Metallurgy (member "and supervisor")

* a. Assistant Prof .Dr. Ahmed Abdul Samea Al-Droubi, Nahrain University, (member "and supervisor")

The student received a rating (very good), so Alf Mubarak, wishing the student continued progress and success, and thank you very much to the chairperson and members of the discussion committee and the respected supervisors for their efforts exerted.

Source : Media Section

Under the slogan (With science we serve and develop our industries)

Under the slogan (With science we serve and develop our industries)

The Production Engineering and Metallurgy Department, in cooperate with the General Company for Mining Industries, holds a specialized symposium sponsored by the President of the University of Technology, Prof. Dr. Ahmed Mohamed Hassan Al-Ghabban, and supervised by the Mrs. Head of the Production Engineering and Metallurgy Department, Professor Dr. Mona Khudair Abbas, and cooperation with the General Company for Mining Industries. The Production Engineering and Metallurgy Department / Mining and extracting minerals, has been set up his specialized symposium entitled: (With science we serve and develop our industries) on Wednesday 3/3/2021 and on the FCC electronic platform, the symposium was opened with the recitation of verses from the Holy Quran, recited by faculty member Assistant lecture Asaad Hasan Lafta, followed by words for the scientific assistant Prof. Haider Abdul-Dahd ,the representative of the President of the University of Technology, then the head of the Production Engineering and Metallurgy Department, Prof.Dr. Mona Khudair Abbas, and also the General Director of the General Company for Mining Industries, Engineer Riyad Jasim Kazem and Prof. Dr Sami Ibrahim al-Rubaie, head of the branch of mining engineering and extracting minerals. These words confirmed that Iraq has many ores that represent national wealth that should be extracted and invested in the service of the country. Then these words were followed by two scientific sessions, the first headed by Prof.Dr. Sami Ibrahim Al-Rubaie and the assistant lecture Shaima Talib included a working paper of the General Company for Mining Industries presented by Senior chief Engineers Raghad Mohiuddin Jassim entitled (Future Prospects for Mining Industries in Iraq). And lecture.Dr. Zaman Karam Mikhilif, entitled (The Existence of Copper in the Water Associated with Crude Oil) and paper work of Assistant Prof. Dr. Mustafa Ahmed Ragab from the Department of Mechanical Technology / Central Technical University, entitled (The role of mining industries and mineral extraction in organizing the national economy and promoting human development). As for the second session, it was chaired by Assistant Prof. Dr. Abdel-Khaleq Hammoud and the programing leadership Assistant prof. Dr. Muhannad Farhan, where lecture Dr. Ahmed Falih Hussein submitted working paper entitled (Methods for treating Iraqi telegraph mud and its effect on the functional properties of oil well drilling mud) . lecture Dr. Nasser Kurdi Zeidan also submitted working paper entitled (Scientific and future prospects for the use of silicon in our national industries) as well as a working paper presented by Assistant Prof. Dr. Shaima Hadi Khudair / University of Babylon / College of Education for Pure Sciences with the title (Applications of Nanotechnology in Applied Industries). The symposium concluded with recommendations made by lecture Dr. Amjad Ibrahim confirmed that the results of such seminars are the perpetuation of the link and cooperation between universities and the industrial sectors, and the introduction of scientific research carried out in universities within the plan to develop productive industries. The symposium was managed by journalist Prof. Dr. Zuhair Shamma Ali. It is mentioned that this seminar was held within the memorandum of understanding that was signed between the Production Engineering and Metallurgy Department and the State Company for Mining Industries on 2/24/2021.

Source : Media Section

A scientific visit for production engineering students to the Central Library at the University of Technology

A scientific visit for production engineering students to the Central Library at the University of Technology

As a continuation of the work within the initiative of the President of the University of Technology for cooperation between the scientific departments and the central library at the university, and as a continuation of the series of scientific visits for students of the Production Engineering and Metallurgy Department, the Production Engineering Branch, one of the department’s branches, organized a scientific visit for the students of the junior stage in it to the Central Library, and the students were accompanied by each of Dr. Adel Ghanem Tohma and Assistant lecture. Asaad Ali Abbas, as well as a number of library officials and staff, received them. The students were informed of the library departments and halls, how to search for resources, and issue identification cards for the library and reading room in which there is free internet service during working hours.

Source : Media Section

Discussion of a master's thesis in production engineering

Discussion of a master's thesis in production engineering

A master's student in the Production Engineering and Metallurgy Department / Production Engineering Branch (Farzdaq Nabil Thamer) discussed his thesis tagged:

((Studying the effect of turning cutting conditions on surface roughness using nano structured coated tools))

In the field of production engineering, and at the hall of the late Prof. Dr. Ibrahim Mahmoud Mansour in the department, the discussion committee consisted of the gentlemen whose

names are listed below:

* Prof.Dr. Saad Hamid Najm, University of Babylon / College of Engineering ..... (Chairman)

* Assistant Prof.Dr. Abbas Fadel Ibrahim, University of Technology /Production Engineering and Metallurgy Departmant ... (Member)

*Lecturer. Dr.. Raed Rashid Shwish, University of Technology / Production Engineering and Metallurgy Department .... (Member)

* Assistant Prof. Ali Abbar Khleif, University of Technology / Production Engineering and Metallurgy Department .... (Supervisor)

* Assistant Prof. Dr.Farhad Muhammad Othman, University of Technology / Director of the Department of Continuing Education .... (Supervisor)

The student received a rating (very good), so Alf Mubarak, wishing the student continued progress and success, and thank you very much to the chairperson and members of the

discussion committee and the respected supervisors for their efforts exerted.

Source : Media Section

The rector of the University of Technology rewarded two teachers in the Production Engineering and Metallurgy Department

The rector of the University of Technology rewarded two teachers in the Production Engineering and Metallurgy Department

The rector of the University of Technology, Prof. Dr. Ahmed Muhammad Hassan Al-Ghabban, the faculty of Production Engineering and Metallurgy Department, rewarded the participants in the training course to perform the electronic exams through the canvas platform on Wednesday 10-2-2021 in the presence of the members of the distinguished university council and the head of the production engineering and Metallurgy department Professor Dr. Mona Khudair Abbas, who are Both Dr. Attia Abdul-Kazem Al-Zuhairi and the lecturer Sarah Muhammad Sharif.

Source : Media Section

A scientific visit to the Central Library at the University of Technology

A scientific visit to the Central Library at the University of Technology

Within the initiative of the President of the University of Technology and the respected Assistant of the President of the University for Scientific Affairs, and based on the principle of cooperation between the scientific departments and the central library at the university, the Computer Aided Design and Manufacturing Engineering Branch in the Production Engineering and Metallurgy Department organized a scientific visit on Sunday 24/1/2021 for students of the fourth stage To the central library at the university, as part of the extra-curricular activities of the Production Engineering and Metallurgy Department confirmed by the esteemed University Presidency, where students are transported in the corridors of the Central Library, accompanied by each of Assistant Prof. Aqeel Sabri Badan and lecturer Dr. Ali Muhammad. The library and the services it provides to students to support the scientific process were examined.

Source : Media Section

Discussing the doctoral thesis in mineral engineering

Discussing the doctoral thesis in mineral engineering

A doctoral student in the Production Engineering and Metallurgy Department / Mining Engineering and Extraction Branch the member faculty (Nasser Kurdi Zeidan) was discussed

about his thesis tagged with:

((New Development in Chemical Extraction Process for Production of High Purity Silicon and Nanosilicon from Iraqi Natural Sources))

And that is at exactly nine o'clock in the morning on Thursday, 14/1/2021, at the hall of the late Professor Dr. Ibrahim Mansour in the department, and the discussion committee

consisted of the gentlemen whose names are listed below:

* Assistant Prof. Dr.Abdul Karim Muhammad Ali, University of Baghdad / Assistant President for Academic Affairs ... (chairman)

* Assistant Prof.Dr. Ammar Saleh Muhammad, University of Baghdad / Department of Chemical Engineering ..... (Member)

* Prof. Dr.Basem Obaid Hassan, University of Baghdad / Chemical Engineering ..... (Member)

* Assistant Prof. Dr.Rabiha Saleh Yassin, University of Technology / Department of Production Engineering and Metallurgy ..... (Member)

* Assistant prof. Dr. Raghad Hamid Hilal, University of Technology / Department of Production Engineering and Metallurgy ..... (Member)

* Prof. Dr.Sami Abu Al-Noon Ajeel, University of Technology / Department of Production Engineering and Minerals ... (member "and supervisor")

* Assistant prof.. Dr.. Khaled Ajami Sukkar, University of Technology / Department of Chemical Engineering ..... (member "and supervisor")

The student received an esteem (excellent), so a thousand congratulations for him for this distinction, wishing him continued progress and success and thanks for the efforts

exerted by the supervisors and members of the discussion committee.

Source : Media Section

Discussing a master's thesis in production engineering

Discussing a master's thesis in production engineering

A master's student in the Production Engineering Department and Metallurgy / Production Engineering Branch (Tahseen Majid Salman) discussed his thesis tagged with:

((Determination and analysis of residual stress in electrical discharge machining process)).

In the field of production engineering, at exactly nine o'clock in the morning on Tuesday 15/12/2020, at the hall of the late Prof. Dr. Ibrahim Mansour in the department, the

discussion committee consisted of the gentlemen whose names are listed below:

* assistant prof. Dr. Maan Abed Tawfiq, University of Technology / Department of Production Engineering and Metallurgy ..... (Chairman)

* Assistant Prof. Dr.Saad Karim Shather, University of Technology / Department of Production Engineering and Minerals ..... (Member)

* Assistant prof. Dr.. Mustafa Ahmed Ragab, Central Technical University / Technical Institute / Baquba ..... (Member)

* Prof.Dr. Shukri Hamid Ghadeeb, University of Technology / Production Engineering and Metallurgy Department ... (member and supervisor)

* M. Raed Rashid Shwish, University of Technology / Production Engineering and Metallurgy Department ..... (member and supervisor)

The student received a rating (very good), so a thousand Mubarak, wishing the student continued progress and success, and thank you very much to the Chairman and members

of the discussion committee and respected supervisors for their efforts.

Source : Media Section

Discussing the doctoral thesis in Metallurgy engineering

Discussing the doctoral thesis in Metallurgy engineering

A doctoral student (Zaman Karam Mikhilif) teaching in the Production and Mineral Engineering Department / Mining and Metallurgical Engineering Branch was discussed about her

thesis tagged with

((Extraction of metals from produced water of Iraqi oil fields))

In the field of Metallurgy engineering, at exactly nine o'clock in the morning on Tuesday, 15/12/2020, at the hall of the late Professor Jassim Al-Hayani in the department, the

discussion committee consisted of the gentlemen whose names are listed below:

* Prof. Dr.Muhammad Hillel Hafez, Basra University of Oil and Gas ..... (Chairman)

* Assistant Prof. Dr.Ahmed Abdullah Ramadan, University of Technology / Department of Petroleum Technology Engineering ..... (Member)

* Assistant ProfDr.. Iyad Abdul-Halim Abdul-Razzaq, University of Baghdad / Petroleum Engineering Department ... (Member)

* Assistant Prof.Dr. Jinan Abdul Karim Abdul Razzaq, University of Technology / Department of Chemical Engineering ..... (Member)

* Assistant Prof. Dr.Firas Farhan Sayed, University of Technology / Department of Production Engineering and Metallurgy ..... (Member)

* Assistant Prof. Dr.Aqeel Zahir Subhi, University of Technology / Production Engineering and Metallurgy Department ... (member and supervisor)

* Assistant Prof. Dr.Ramzi Sihoud Hamid, University of Technology / Petroleum Technology Engineering Department ... (member and supervisor).

The student got a "very good" estimate. A thousand Mubarak wished her continued progress and success, and many thanks to the respected Chairman and members of the

discussion committee for their efforts.

Source : Media Section

Interview applicants for postgraduate studies in the Engineering production and Metallurgy Department

Interview applicants for postgraduate studies in the Engineering production and Metallurgy Department

On Wednesday morning, corresponding to 28/10/2020, an interview was held for students applying for postgraduate studies (PhD - Masters) for the academic year (2020-2021) and for all scientific branches in the presence of the Head of the Department Prof. Dr. Mona Khudair Abbas and the Scientific Associate Assistant Prof. Dr. Tahseen Fadel Abbas, and the heads of the scientific branches of the department, after the students took the competitive exam .The first admission results were announced, where the interviews were held for the applicants in the hall of the late Professor Dr. Ibrahim Mahmoud Mansour in the department and individually to take into account the exceptional circumstances that the country is going through under Corona epidemic. The interviews were preceded by great preparations and efforts by the section of postgraduate Studies in the department represented by the administration of Assistant Prof. Makarem Hazem Abdel Karim and the membership of lecturer Sami Abbas. All the best for our dear students in their scientific career, wishing all success and excellence for the service of our dear university and our beloved country.

Source : Media Section

Discussing the doctoral thesis in production engineering

Discussing the doctoral thesis in production engineering

A doctoral student (Ali Muhammad Jassim), faculty member in the Production Engineering and Metallurgy Department / Production Engineering Branch, has been discussed his

thesis tagged :

((Characterization and development of algorithms for non contact automatic device in reverse engineering of surface reconstruction))

In the field of production engineering, at exactly nine o'clock in the morning on Wednesday 10/21/2020, at the hall of the late Professor Jassim Al-Hayani in the department, the

discussion committee consisted of the gentlemen whose names are listed below:

* Prof.Dr. Wissam Kazem Hamdan, University of Technology / Department of Life Medicine Engineering ..... (Chairman)

* Prof.Dr. Faraj Mahal Muhammad, University of Technology / Department of Electromechanical Engineering ..... (Member)

* Prof.Dr. Shukri Hamid Ghadeeb, University of Technology /Production Engineering and Metallurgy Department..... (Member)

* Assistant Prof. Dr.Tahseen Fadel Abbas, University of Technology / Production Engineering and Metallurgy Department ..... (Member)

* Assistant Prof Dr.. Wajdi Sadiq Abboud, Nahrain University / Department of Engineering of Limbs and Industrial Support ..... (Member)

* Assistant Prof.Dr. Maan Abed Tawfiq, University of Technology / Production Engineering and Metallurgy Department ..... (supervisor)

* Assistant Prof. Dr.Ahmed Abdel Sami Abdel Wahab, Nahrain University / Department of Limb Engineering and Industrial Support .

( supervisor), where the student received a (fulfilled) rating, so a thousand congratulations, wishing him continued progress and success, and thank you very much to the

honorable Chairman and members of the discussion committee for their exerted efforts